Jump to content
SAU Community

Recommended Posts

  • Replies 321
  • Created
  • Last Reply

Top Posters In This Topic

well you got 500cc over me... but I got less weight (well if i take the amp n subs out). I also got mandrel bent extractors and 2.5" exhaust all the way (my only claim to mods), front n rear struts, and apparently aftermarket shocks... so it should be good. My tyres are wierd, they're goodyear f1's which i swear I will never use in my life again... they slide for any reason. Luckily I got LSD n stuff.

I guess this means its on... next drags we have... we shall race to see who takes home the "consolation prize for n/a drivers" trophy. :)

Guest Boxhead
Originally posted by funkymonkey

well you got 500cc over me... but I got less weight (well if i take the amp n subs out). I also got mandrel bent extractors and 2.5" exhaust all the way (my only claim to mods), front n rear struts, and apparently aftermarket shocks... so it should be good. My tyres are wierd, they're goodyear f1's which i swear I will never use in my life again... they slide for any reason. Luckily I got LSD n stuff.

I guess this means its on... next drags we have... we shall race to see who takes home the "consolation prize for n/a drivers" trophy. :)

you have eagle f1s???

hrrrrmmm thats very interesting, thats what was on my car... both times... i wonder if they have anything to do with it...

im getting an s-afc for when i get the engine put in....should i put it on my car while its n/a and see how much gain there is? just as a reference for u guys?

if its not to much trouble i might do it and get it dyno'd :(

Originally posted by doxximus

im getting an s-afc for when i get the engine put in....should i put it on my car while its n/a and see how much gain there is? just as a reference for u guys?

if its not to much trouble i might do it and get it dyno'd :(

YES!!!! that would be awesome if u could do that :D

  • 2 weeks later...

Just saw this thread, good to see something for us NA boys!!

FunkyMonkey, you are not alone! ive also got the RB20DE in my R32!

regarding the RB30 conversion, a bloke here in canberra is currently doing one with a NICS RB20 head and a GTR twon turbo zorhst manifold, the only problems so far that he has come across is the mounting points for the exhaust manifold dont quite line up as in the tabs on the manifold are in the completely wrong places, nothing that a couple of hours with a welder wont fix!

also with the RB30, the standard head uses a 2 valve per cylinder system while the actual original pistons have allowances for 4 per cylinder (if u get what i mean confused myself with that one!) and where the timing belt tensioner goes, there is a blocked off section of the engine that just requires to be drilled out and a thread tapped into it

almost makes the conversion sound easy!

hehehe yeah conversions always seem so simple

btw, i MIGHT be selling my old rb25de and gearbox ecu and loom after i put the rb25deT in :P

it got me 96rwkw UNTUNED (timing was well off so it should make around 100 maybe more and thats not that far off the r32 gtst's stock power :D

so yes, i will work out what im doing then advertise here first before advertising out to the public (if i decide to sell)

Originally posted by SupaFly Skyline

Just saw this thread, good to see something for us NA boys!!

FunkyMonkey, you are not alone! ive also got the RB20DE in my R32!

I jus got a valuation for my car done... currently its valued at more than an R32 GTSt hehehe reason being that its no longer available for import and R32 compliance plates are rarer than hen's teeth :P

So I think I might keep my "beast" in stock form till I decide to get a better car (betcha I end up with an R32 GTR). I might jus concentrate on the interior (leather upholstery n AV n stuff). Not like I get to go fast these days anyways...

I'm def gettin old... goin fast no longer appeals to me, I like doin the corners and puttin the handling of the car to its limits better.

Guest bucket1

Funkeymonkey am I to believe that you've got some aftermarket extractors on your beast? Did you fit them and if so where did you get 'em. My standard system is about kapoot and I've gotta start looking around, thought I may as well go for the lot. By the way, just thought I'd let you know I recently drove from Tassie to Sunshine Coast and back, not one stone chip.

lol juniorrrrrr (u can change what it says btw)

anyways, yeah i got aftermarket Jasma stainless steel extractors on mine, it came attached to a whole 2.5" mild steel exhaust (all mandrel bent)... but the mild steel went kapoot, and my compliancer put a very restrictive cat in the system creating a bottleneck, so I got rid of it n put a hi flo 2.5" cat and redid the whole exhaust in stainless steel n mated it to the extractors.

All up the extractors were free and the cat back exhaust cost me $900 (with labour... whole job was done in 4 hours).

hey funky......

i made that trip to sydney we were talking about a while ago...

i did get a few stone chips from different things...i was amazed with the amount of skylines and just general imports around the liverpool/enfild/bankstown area where i was staying.....

going to bed, i still tired from leaving melb fri morn, then leaving syd sun morn hehehe

cheers

lol u'r smack bang in the heart of leb/import car city lol...

you'll have plenty of street drags in that area :D and you'll see a lot of done up excels and gemini's too... be careful of them... if you see em juscut em off... they dun deserve to be on the road... don't worry about ettiquette, everybody else in sydney hates em too...

oh and all syd drivers will think you can't drive, so jus run em off the road too...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have a 6 boost manifold and it has loads of bends etc. turbo has a cover however manifold doesn’t so I started to wrap what I could without taking turbo off. Very restricted area   are you stating wrapping could lead to cracking weld? Is that because heat is retained?    i have a exhaust gas temp right after turbo and it hits 700degree or 800 at times.   there are areas which is impossible to reach with fibre glass cloth. Is there anything I could apply such as the photo shared earlier which would formulate around exhaust pipe in difficult to reach areas, sort of like aluminium foil flexible to shape it in place?   i think from earlier reply you mentioned acl? Is this what you meant?   https://www.nstparts.com/product/acl-heat-shield-700x275     photo of my engine bay   https://ibb.co/9grHsMN https://ibb.co/bXC8KRM https://ibb.co/KV3kGZc   I am trying to cover bottom of the exhaust manifold which joins the turbo. Only way is to take turbo and possible manifold out as it also touches the engine mount which I don’t fancy doing
    • So....I managed to fix the belt coming off problem, but unfortunately i destroyed my oil pump. While testing and hitting my rev limiter a bunch, my oil pump took a shit. I actually heard it break. In my great wisdom i decided to hit redline 5 times (original plan). Lowered it to 7500 for the soft limiter. Normally it would come off on the first go. The 6th time I hit the limiter the pump broke and as i began accelerating again and hit it the 7th time, oil pressure dropped and the protection kicked in. It actually made a "tink" as if i dropped something hollow.   The motor is pulled and should be rebuilt and put back in 3 weeks. No bearings were spun and i could have gotten away with simply replacing the pump, but since i had to pull the motor....might as well build it   I made a billet tensioner and the belt stayed on without getting frayed. I also made one for a friends R33, but I was thinking of using a hydraulic unit to keep constant pressure on it when the belt stretches.
    • Yeah 98 for me, and 6.7/100 was my actual usage. On the downside the bloody thing still isn't running properly but at least they hybrid system is happy now. It starts but missfires like a bastard, and isn't throwing any code except "missfire". Thanks scoop. I did notice the AFMs are reading quite different at idle 1.33v and 1.67v so 25% variance (and have both changed and swapped them, the issue stays on the driver's side afm) so I'm looking for exhaust restriction (mouse nest?), compression issue or (hopefully not, no physical damage seen) wiring issue. Throttle might also be an issue but that is harder because you can't swap them side to side and not cheap to fire the parts cannon at.
    • I hope you're right and it somehow justifies it's existence!
×
×
  • Create New...