Jump to content
SAU Community

Recommended Posts

noticed on weekend when car reaches 8 to 10 psi of boost i get this weird noise all of the sudden.... it hard to explain its like a metal screeching noise......car runs fine. only does it on higher boost......car has stock turbo running 11psi from turbotech boost valve...could the turbo be on its way out or a boost/vacuum leak?

Link to comment
https://www.sau.com.au/forums/topic/234402-unusual-noise-on-boost/
Share on other sites

Could be many. I had the same noise though and all my bolts holding the turbo to the manifold had worked lose and the gasket wasnt sealing.

Luckily the gasket was still fine and a simple socket on the bolts fixed my problems :P

Check all your gaskets for one.

Could be many. I had the same noise though and all my bolts holding the turbo to the manifold had worked lose and the gasket wasnt sealing.

Luckily the gasket was still fine and a simple socket on the bolts fixed my problems :P

Check all your gaskets for one.

+ 1

and check the turbo for shaft play while you're down there.

oh the joys of imports. Pretty sure its not the exh manifold on mine, looks pretty solid on there, but will go out n have a poke around the engine bay in a minute, got most of the leaks i can find fixed, just have to do this V-band!

I actually thought that KKR turbos were meant to scream on high boost for some reason lol ;s

I had to put the heat shield off and walla. Could move the turbo up and down. Once it was all back together its amazing how quickly it builds boost. I guess over time you dont notice your reponse slowly dropping...

Thats probably the more extreme case, but the little lugs just couldnt keep the nuts in place.

oh the joys of imports. Pretty sure its not the exh manifold on mine, looks pretty solid on there, but will go out n have a poke around the engine bay in a minute, got most of the leaks i can find fixed, just have to do this V-band!

I actually thought that KKR turbos were meant to scream on high boost for some reason lol ;s

If looks could kill... Dosent hurt to put a socket on and see, mine was finger tight on the last 3 (near No 6)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
    • Not great at getting the camera out fast enough for cars driving. Even in traffic. S15 is in front of the kei truck.
×
×
  • Create New...