Gtt Rims Offset

[dori34]

Pics as promised. used my crappy phone camera but will take some better pics later on with a proper camera.

17x8 +17, 225/45 front

17x9 +17 235/45 rear

fronts stick out like 2~ish mm - prob will sit flush with a 215/45 tyre

rear fits perfectly fine - neither needed any guard work however the fronts needed the splash guards removed.

for the rears, if i was to choose new wheels, id go +13~ & for the fronts i'd go +20.

may lower it some more in future to get it sitting a bit better but im happy atm with its fitment.

Edited September 21, 2008 by dori32

[Dal34]

I'm going some Work Emotion XD9s in bronze on my dark blue pearl R34 GTT Coupe, my car sits damn low, you have no hope of getting a coke can around the front or sides, only the back is a abit forgiving. Going to have streched tyres on her.

Front : 18x8, +35 offset

Rear : 18x9, +38 offset

I hope that it turns out okay and sits nicely close to the gaurds.

[dori34]

^ what kit do you have?

[Dal34]

Guniune CWest all 'round, including eyelids, fits like a glove.

Just debadged, delocked and dewinged the whole car though.

[SoFly]

wouldnt need to stretch the tyres with the widths/offsets your getting for the 34.

for that width and offset 225/255s will be fine to fill up the guards.

if you want the a more aggressive look i'd go. 18x9 +20 215/40 and 18x10 +17 235/40.(or even 18x9+20 all round)

[dori34]

^ yeah dave i wanna get 18s but $$ is low atm

18" will fill the R34 guards out so well.

[SHANE666]

lol omfg dori that looks phat as!!

nice job!!

[TR34GT-000]

  dori32 said:

these rims from driftgarage are fken awesome!!!!!!!

for $1080 17" with good size & offsets, cannnot go wrong!!!

this is the new driftkteks atm.

everyone dick & harry is gonnna have them.

www.driftgarage.com.au

Dori,

I just went to their site and checked out the stock.

You were right !!!!!!!!!! Those Project D rims are absolutely awesome.

The price is also pretty bloody good. (if I had any money)

Many thanks for the web site link.

Regards

Jim (TR34GT)

[dori34]

^ no worries mate

i was thinking of getting a set for myself but i realised how popular they will be in a few months time lol.

[full house]

It looks new . . . how much do you sold it? I bet its expensive.

[dori34]

UPDATE: found out my front tyres are 225/50 and i think thats why its scrubbing still!!!!

[TR34GT-000]

  dori32 said:

UPDATE: found out my front tyres are 225/50 and i think thats why its scrubbing still!!!!

Hey Dori,

The R34 GTT has a standard 17"x 7.5 + 35 offset Nissan rim that is fitted with 225 x 45 ZR 17 tyres.

The link to the Aaron Bohnen tyre selection guide is listed below. (if you have Microsoft Excel)

If you type in the standard Nissan 17" profile mentioned, in the left hand column, you will be able to see the tyres which will match your car the best in various widths and diameters. It also gives you the information of speed differences due to the wheel diameter differences.

http://www.superjamie.net/garage/tire.xls

The tyre rating symbols for various makes are also as follows:

Tire Speed Rating Symbols:

S - 180km/h or 112mph

T - 190km/h or 118mph

U - 200km/h or 125mph

H - 210km/h or 130mph

V - 240km/h or 149mph

W(ZR) - 270km/h or 168mph

Y(ZR) - 300km/h or 186mph

ZRAbove - 300km/h or 186mph

Yep, the 225 x 50 tyre may cause a few issues in the scrubbing department, and you are also travelling faster than your speedo would indicate. ie........you would be travelling at 103.5 km/hour when you speedo is reading 100 km/hour.

If you save a copy of the guide, it will let you look at all sorts of combinations.

You may also like to check out the past issue of High Perfromance Imports which addressed the maximum diameter and widths that would fit under normal R32, R33 and R34 guards. Apparently, the R33 had the best factory widths for 18 x 8.5 and 18 x 9.5 fitments.

Safe motoring.

Regards

TR34GT (Jim)

Edited September 25, 2008 by TR34GT-000

[full house]

I also think so, change the size.

  dori32 said:

UPDATE: found out my front tyres are 225/50 and i think thats why its scrubbing still!!!!

[dori34]

only scrubs when i hit a big bump!!

went thru nasho the other night and alot of scrubby scrubby.. lol

im changing to 215/45 soon

[SHANE666]

thinking of some 350z rims for my car now....

[full house]

350z rims! not a bad idea. . .

[~Hypnotik~]

  Dal34 said:

I'm going some Work Emotion XD9s in bronze on my dark blue pearl R34 GTT Coupe, my car sits damn low, you have no hope of getting a coke can around the front or sides, only the back is a abit forgiving. Going to have streched tyres on her.

Front : 18x8, +35 offset

Rear : 18x9, +38 offset

I hope that it turns out okay and sits nicely close to the gaurds.

Why would you bother getting such horrible offsets when buying new?

Don't be weak, go 18x9 +20 front and 18x10 +18 rear. It'll fit fine with stretched tyres and a bit of guard love...

[TR34GT-000]

What about Just Jap for a set of R34 GTR second hand rims? Awesome!

I still like those freekin Lenso rims that Dori found. LOL

For mine, it'll be 17" x 8 front and 17" x 9 rear with some wide 235mm and 255mm Marangoni tyres respectively.

(dreams of more money)

[dori34]

  TR34GT-000 said:

What about Just Jap for a set of R34 GTR second hand rims? Awesome!

I still like those freekin Lenso rims that Dori found. LOL

For mine, it'll be 17" x 8 front and 17" x 9 rear with some wide 235mm and 255mm Marangoni tyres respectively.

(dreams of more money)

For R34,id stick to 18, 17" dont fill the guards quite well but im not saying 17s dont look good tho.

youd prob have to get bigger sizes for the rear, prob x10 lol

and front & rear with low offsets to fill the fat guards.. rear would be +12, fronts around +20ish