Jump to content
SAU Community

Recommended Posts

Pics as promised. used my crappy phone camera but will take some better pics later on with a proper camera.

17x8 +17, 225/45 front

17x9 +17 235/45 rear

fronts stick out like 2~ish mm - prob will sit flush with a 215/45 tyre

rear fits perfectly fine - neither needed any guard work however the fronts needed the splash guards removed.

for the rears, if i was to choose new wheels, id go +13~ & for the fronts i'd go +20.

may lower it some more in future to get it sitting a bit better but im happy atm with its fitment.

wheel4ii2.jpg

wheel3rj0.jpg

wheel2hw3.jpg

Edited by dori32

I'm going some Work Emotion XD9s in bronze on my dark blue pearl R34 GTT Coupe, my car sits damn low, you have no hope of getting a coke can around the front or sides, only the back is a abit forgiving. Going to have streched tyres on her.

Front : 18x8, +35 offset

Rear : 18x9, +38 offset

I hope that it turns out okay and sits nicely close to the gaurds.

wouldnt need to stretch the tyres with the widths/offsets your getting for the 34.

for that width and offset 225/255s will be fine to fill up the guards.

if you want the a more aggressive look i'd go. 18x9 +20 215/40 and 18x10 +17 235/40.(or even 18x9+20 all round)

  dori32 said:
these rims from driftgarage are fken awesome!!!!!!!

for $1080 17" with good size & offsets, cannnot go wrong!!!

this is the new driftkteks atm.

everyone dick & harry is gonnna have them.

www.driftgarage.com.au

Dori,

I just went to their site and checked out the stock.

You were right !!!!!!!!!! Those Project D rims are absolutely awesome.

The price is also pretty bloody good. (if I had any money)

Many thanks for the web site link.

Regards

Jim (TR34GT)

  dori32 said:
UPDATE: found out my front tyres are 225/50 and i think thats why its scrubbing still!!!!

Hey Dori,

The R34 GTT has a standard 17"x 7.5 + 35 offset Nissan rim that is fitted with 225 x 45 ZR 17 tyres.

The link to the Aaron Bohnen tyre selection guide is listed below. (if you have Microsoft Excel)

If you type in the standard Nissan 17" profile mentioned, in the left hand column, you will be able to see the tyres which will match your car the best in various widths and diameters. It also gives you the information of speed differences due to the wheel diameter differences.

http://www.superjamie.net/garage/tire.xls

The tyre rating symbols for various makes are also as follows:

Tire Speed Rating Symbols:

S - 180km/h or 112mph

T - 190km/h or 118mph

U - 200km/h or 125mph

H - 210km/h or 130mph

V - 240km/h or 149mph

W(ZR) - 270km/h or 168mph

Y(ZR) - 300km/h or 186mph

ZRAbove - 300km/h or 186mph

Yep, the 225 x 50 tyre may cause a few issues in the scrubbing department, and you are also travelling faster than your speedo would indicate. ie........you would be travelling at 103.5 km/hour when you speedo is reading 100 km/hour.

If you save a copy of the guide, it will let you look at all sorts of combinations.

You may also like to check out the past issue of High Perfromance Imports which addressed the maximum diameter and widths that would fit under normal R32, R33 and R34 guards. Apparently, the R33 had the best factory widths for 18 x 8.5 and 18 x 9.5 fitments.

Safe motoring.

Regards

TR34GT (Jim)

Edited by TR34GT-000
  Dal34 said:
I'm going some Work Emotion XD9s in bronze on my dark blue pearl R34 GTT Coupe, my car sits damn low, you have no hope of getting a coke can around the front or sides, only the back is a abit forgiving. Going to have streched tyres on her.

Front : 18x8, +35 offset

Rear : 18x9, +38 offset

I hope that it turns out okay and sits nicely close to the gaurds.

Why would you bother getting such horrible offsets when buying new?

Don't be weak, go 18x9 +20 front and 18x10 +18 rear. It'll fit fine with stretched tyres and a bit of guard love...

What about Just Jap for a set of R34 GTR second hand rims? Awesome!

I still like those freekin Lenso rims that Dori found. LOL

For mine, it'll be 17" x 8 front and 17" x 9 rear with some wide 235mm and 255mm Marangoni tyres respectively.

(dreams of more money)

post-55447-1222729394_thumb.jpg

  TR34GT-000 said:
What about Just Jap for a set of R34 GTR second hand rims? Awesome!

I still like those freekin Lenso rims that Dori found. LOL

For mine, it'll be 17" x 8 front and 17" x 9 rear with some wide 235mm and 255mm Marangoni tyres respectively.

(dreams of more money)

For R34,id stick to 18, 17" dont fill the guards quite well but im not saying 17s dont look good tho.

youd prob have to get bigger sizes for the rear, prob x10 lol

and front & rear with low offsets to fill the fat guards.. rear would be +12, fronts around +20ish

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That idea has crossed my mind, I do a 5km walk everyday, this does take me past some bushland......I think you may be onto something 馃槈  That, plus 1 rock on every bin night might do the trick, it may take a year, but it could save me a couple of grand The only issue is the big 'Boonies", I have a few that weigh around 30-40kg, maybe they should be the first to go into the raised garden bed,  and then let the next owner deal with them....my daughter gets the joint when I kick the bucket, mums the word mate......LOL Noice......
    • Wow. Did you call the car a Nissan Skyline?
    • You're retired Mark, on bin night, go for a walk, kind of like you're doing the beep test. Put one rock in the first neighbours, come back, get another rock, go to the second neighbours, repeat over many weeks. All rocks eventually gone...
    • No chop chop of anything mate, it is what it is, plus, I don't want any air that isn't either going through the cooling stack or intake getting into the engine compartment increasing under bonnet pressure  Yeah, the Mazda Speed aftermarket intake above is less than ideal for multiple reasons, the requirement to remove the bumper every time you need to service the filter, and also smaller in diameter than the NC1 OEM one Weirdly, Mazda Speed is part of the Mazda motorsport division, "form over function" and $$$$$ for Mazda from unsuspecting punters I suspect  After some googling about them it seems they added no power, but do increase some induction noise Meh In other news, the electricians have been busy today at the house, and are back tomorrow finishing up all the security stuff and exterior lighting, they also added some lighting on the garage ceiling, which will come in handy when working in the garage when it's not freezing out there My Birdies raised garden bed also arrived today as well, which I'll put together and place tomorrow, it's a big tall Bessie, 74cm high, 92cm wide and 214cm long, this will come in handy as I am starting to get "stockpiles" of good soils from doing landscaping, some of the clean rock, namely the river stone, will go into the bottom of the bed for drainage, as well as the old Apricot tree that was out the back,  and when it's full, I'll grab another one, I will be growing enough veggies to keep me both busy as well as supplementing the shopping list I'm also awaiting another quote for a new Colourbond front fence, as the "1980 style cemented in rock edging" that was there and "fashionable at the time" looked arse, and my god, the amount of cement used to fix the rock was insane, it took 1.5 days for me to break out 12 meters of the stuff by hand, trim the bushes back to the fence line and dump it out the back of the joint to deal with at a later date,I will soon need a skip bin to tip it all Unfortunately they did alot of the cemented in rock around the joint, which I hate, so a few pallets of retaining wall blocks for around the front and back where the cemented in rock is will be required to bring it up to a standard, and look, that I will be happy with 12 meters worth of rock and cement Finished smashing the fence line and ready for a fence to be installed, yes, the lawns need some TLC and thickness, the previous owner trimmed the grass to the roots 馃槩, the TLC I can provide, and nature over time will do the rest And there's probably about another 40 meters worth of this landscaping abomination left to do around the front and back gardens, I'm guessing maybe 3 or 4 tons worth, tip fees for this will be a killer Meh, all in all I'm having fun and keeping busy, plus, it's good PT
    • If I drove to a typical petrol station, what would my choices of fuel be? 
  • Create New...