Jump to content
SAU Community

Recommended Posts

hey, im planning to get my windows tinted but have a few questions, first of all i know u can tint all your windows except the front, and also know they do it by shades etc.

So im planning to go the darkest legal tint which blocks 99%UV and offers more privacy and security. So that leaves me with which windows should i get tinted?

- all windows except the front

- rear window and the 2 qaurter windows at the rear

- other (sugesstions)

I asked around for some price qoutes and they vary around $200, fairly expensive for just somefilms. If you guys know any other places that do a good job and is cheap in adel please post.

Thanks in advance, nada.

Link to comment
https://www.sau.com.au/forums/topic/234540-windscreen-tinting/
Share on other sites

$200 isnt that bad. its not that had to do it yourself but the back screen can be a prick cause of its size. in my oppinion well worth the money and not have the stress of screwing it up.

plus if you spend a bit to get it done you know it will be done right. nothing worse than seeing a car where the tint is all peeling off. just make sure you go to a place that offers a warrenty on the job.

$200 isnt that bad. its not that had to do it yourself but the back screen can be a prick cause of its size. in my oppinion well worth the money and not have the stress of screwing it up.

plus if you spend a bit to get it done you know it will be done right. nothing worse than seeing a car where the tint is all peeling off. just make sure you go to a place that offers a warrenty on the job.

+1 +1 +1!!!

and Do as much as you can, looks silly if you only do the qtr's.

Also you might be able to do the top section of the front windscreen, not sure if that's still allowed or not??

  • 2 weeks later...

i got my window tints done, all up cost me $200 bucks which is awsome other places where charging around 270 - 320!

the tint was for the rear windscreen and all the sides, however the catch is the driver and passegnger side have to be 70% and the darkest you can go is 35% (the lower the darker)

BUT he was a nice guy and was like tell you what ill just do 35% all the way through! but if you get pulled over dont mention this place! LOL sure thing!

After the tinting was done i asked how much it wouldve cost if i wanted darker etc and he was like nuts, should have said so before same price mate as darkest as you want, you can even get a mirror tint, i was like dang too late. i could have went presidential 5% LOL

The point is i got my tinting done for a good price :)

OH and my brother who has a 2001 WRX got his front windscreen replaced from the same guys the next day because he had small stone chips on his, he got qouted for $400+ at O'briens and the place i recommended him only charged $140 and this was quality glass not that china crap O'briens gets!

If you want the contact details, just pm me. and ill arrange what ever you need :down:

So you got the legal 35% all the way around??

I got 18% all the way around. Best thing i did to my car after suspension upgrade. Awesome driving around in the middle of the day with the windows up no glare at all.

i got my window tints done, all up cost me $200 bucks which is awsome other places where charging around 270 - 320!

the tint was for the rear windscreen and all the sides, however the catch is the driver and passegnger side have to be 70% and the darkest you can go is 35% (the lower the darker)

BUT he was a nice guy and was like tell you what ill just do 35% all the way through! but if you get pulled over dont mention this place! LOL sure thing!

After the tinting was done i asked how much it wouldve cost if i wanted darker etc and he was like nuts, should have said so before same price mate as darkest as you want, you can even get a mirror tint, i was like dang too late. i could have went presidential 5% LOL

The point is i got my tinting done for a good price :(

OH and my brother who has a 2001 WRX got his front windscreen replaced from the same guys the next day because he had small stone chips on his, he got qouted for $400+ at O'briens and the place i recommended him only charged $140 and this was quality glass not that china crap O'briens gets!

If you want the contact details, just pm me. and ill arrange what ever you need :rofl:

Nice!, did you have tint on before hand, if so does that price include removing old tint and then applying the new, or do u need new glass if its already got tint applied?

So you got the legal 35% all the way around??

I got 18% all the way around. Best thing i did to my car after suspension upgrade. Awesome driving around in the middle of the day with the windows up no glare at all.

lol, awesome driving at night in the pitch black too? lol

Err well it's not as dark as you would think and it takes all of a few moments to get used to it. Most places you drive at night have street lights anyway... therefore don't notice it. If you went somewhere that didn't have street lights it doesn't matter if you have crystal clear windows or 5% tint. Unless you can see in the dark that is :) can you?

Err well it's not as dark as you would think and it takes all of a few moments to get used to it. Most places you drive at night have street lights anyway... therefore don't notice it. If you went somewhere that didn't have street lights it doesn't matter if you have crystal clear windows or 5% tint. Unless you can see in the dark that is :) can you?

lolz not as well as id like to, maybe i need eyes like riddick?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, my moulds and seals are 32 years old now. I think I will continue to not use a pressure washer on it.
    • I hear the old "I'd never use a pressure washer on my motorbike" BS in the dirtbike community too.  The only people that have had a problem from using a pressure washer on anything are the people that aren't using them properly.  If you hold the wand any more than 45 cms away from pretty much anything (radiators, wiring connectors, paint, etc) you aren't going to cause any damage.  We've had detailers wreck moulds and seals on cars at work before and the only reason why is they held the pressure washer too close and on the one spot for too long.  If you have 5% more brain power than a detailer then you know not to not do that and you'll never have a problem.
    • I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
×
×
  • Create New...