Jump to content
SAU Community

Recommended Posts

My car (r34 vs2) is stuck at the compliance shop. I get different

stories but basically it barely starts and if it does it doesn't hold. Initially they said

the injectors were getting pulse but now they say they are not. Runs for two seconds,

they said. Plugs checked and not fouled. ECU is nismo, not stock, but must be close.

No check engine light. Alarm disarmed.

I call tuning shops and they are all backed up, and/or need the car flatbed to them and

back. I'm having trouble with the idea that it is a major problem as the car came

from zele and they don't have cars in their showroom that can't even be started.

Anyone here know someone who can do a visit (south brisbane) to diagnose the problem

at least to the point of being sure it needs to go to a tuning shop?

please PM me.. running out of options. If it won't start, it can't get complied -- I'm trying

to avoid more flatbed trips, charges mounting up.

thanks!

Edited by r34nur
Link to comment
https://www.sau.com.au/forums/topic/234568-mobile-efimechanic-guy/
Share on other sites

Hey mate,

Spoke to Barry twice this afternoon. By the time I rang him he had already sent it up to another diagnostic guy. He is a German fellow that does ECU diagnostics for a living. Hopefully he will have some success with it but when I spoke to Barry at the end of the day he had not made any progress. He said the car will not turn over now.

Barry mentioned to me something about the two immobilisers but I think we can do something to bypass these. I also think there may be any issue with the Nismo ECU. I don't know if you are the same bloke that I have spoken to on a couple of different occasions regarding the Nismo ECU in your R34 GTR but if not, then that's ok. I will be heading down there with some diagnostic equipment tomorrow at lunch so if the German bloke has no luck with it, hopefully I will be able to tell Barry why it won't go.

Cheers, Daniel

Hey mate,

Spoke to Barry twice this afternoon. By the time I rang him he had already sent it up to another diagnostic guy. He is a German fellow that does ECU diagnostics for a living. Hopefully he will have some success with it but when I spoke to Barry at the end of the day he had not made any progress. He said the car will not turn over now.

Barry mentioned to me something about the two immobilisers but I think we can do something to bypass these. I also think there may be any issue with the Nismo ECU. I don't know if you are the same bloke that I have spoken to on a couple of different occasions regarding the Nismo ECU in your R34 GTR but if not, then that's ok. I will be heading down there with some diagnostic equipment tomorrow at lunch so if the German bloke has no luck with it, hopefully I will be able to tell Barry why it won't go.

Cheers, Daniel

thanks mate, I really appreciate it.

The immobilizers (factory and clifford) keep getting blamed but the clifford is 100% off/disarmed/inactive..

so that just leaves the factory nissan alarm. Presumably it indicates its state via the red light on the dash,

and is a lot simpler than the clifford.. you press unlock, and hear the door locks chunk.. starter motor wouldn't

even turn over if the factory alarm was getting in the way. And the clifford guy points out that when the

clifford arms nothing lights up: no dash, no starter, nothing. So I really don't see how it can be an immobilizer

unless its a third secret hidden one.

I look forward to what today brings. So far we've had Barry, an alarm expert, Warren (another alarm expert

but with all the clifford software) and someone else with a nissan consult interface, now this german guy

and probably you as well. This car is turning into a serial killer of experts ... I am scared of seeing the final bill

for "compliance", lol.

I'm sure everyone is on the edge of their seats on this one so I'll wrap it up with a semi-happy ending:

$180 spent on the above-mentioned german fellow traced the fault to the nissan factory immobilizer .. which was beaten back into shape somehow, and now the car runs as it should have to begin with! I should be able to get my hands on the thing by next week now after compliance finishes up.

Tossing up whether to drive it down sans-plates to sydney, or ship it down..

I'm sure everyone is on the edge of their seats on this one so I'll wrap it up with a semi-happy ending:

$180 spent on the above-mentioned german fellow traced the fault to the nissan factory immobilizer .. which was beaten back into shape somehow, and now the car runs as it should have to begin with! I should be able to get my hands on the thing by next week now after compliance finishes up.

Tossing up whether to drive it down sans-plates to sydney, or ship it down..

Fly up, I'll give you a beer for your trouble and drive the thing back to Sydney so you can teach it a lesson on the way home.

Inland route isn't bad, and is generally quicker time-wise than the coast route (despite being ~30km longer). Last time we went to Sydney we came back by heading west via Musswelbrook, then north through Tamworth (we have a photo of the 33 parked in front of the Golden Guitar lol), Armidale etc, then east to Coffs via Bellingen, then up the coast. If you want to go inland the whole way, instead of heading to Coffs you can continue north via Glenn Innes and Tenterfield and come out around Warwick.

Reverse this for your purposes of course but that's how we plot our trips back from Sydney :banana:

how about max octane fuel en-route :banana:
We had no problems getting 98 the whole way. Make sure you fill up just inside the Qld border though, fuel jumps in price once you hit NSW.

Coffs Harbour, Armidale, Muswellbrook should all have 98, if you need to stop before you make it to Sydney you can stop at Hexham or Wyong. I'm not sure about going via Tenterfield, they may or may not have 98 so if you need that, you're safer heading south to Coffs then west to Armidale, then south from there to Musswelbrook, then head towards Sydney.

done the coast road several times, byron, nimbin and all that jazz

but is an inland route worth doing? mountains forests .. ?

how about max octane fuel en-route :)

So how long till you finally came out of nimbin.. hemp-bar lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...