Jump to content
SAU Community

Recommended Posts

Hi All,

Someone mentioned the change in private plates and what you are allowed to have and I couldn't find anything about this on the dpi website so thought I'd email them..

What I sent...

is it true there will be no more car specs allowed on number plates?

Like engine (RB25DET)or reference to car brands ie FORD or

HSV etc etc????

This is what i got back..

The Department has always restricted the use of words with Makes of

vehicles within the plate number. However from January 2008 the

Department have also restricted the issue of Models of vehicles that do

not have three additional characters with the model characters. The

additional three characters must contain minimum one alpha and number.

Also the additional characters must not be make or model related to a

vehicle

So who can make sense of that?

LOL

Edited by StageaGirl
Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

I know you are not allowed anything with GTR in it as Nissan has set of copyright restrictions or something like that.

Mike has battled with them over this and its not possible for him to get what he wants.

Mike, shed some further light on this?

Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/#findComment-4110561
Share on other sites

Hi All,

Someone mentioned the change in private plates and what you are allowed to have and I couldn't find anything about this on the dpi website so thought I'd email them..

What I sent...

is it true there will be no more car specs allowed on number plates?

Like engine (RB25DET)or reference to car brands ie FORD or

HSV etc etc????

This is what i got back..

The Department has always restricted the use of words with Makes of

vehicles within the plate number. However from January 2008 the

Department have also restricted the issue of Models of vehicles that do

not have three additional characters with the model characters. The

additional three characters must contain minimum one alpha and number.

Also the additional characters must not be make or model related to a

vehicle

So who can make sense of that?

LOL

Alrighty then.....

Ok from how I've read it:

RB26 would not be ok

RB26 2JZ would be fine

Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/#findComment-4110643
Share on other sites

^ what he said

My money is on the fact that the licensing dept has seen what has been happening with the auctions of private plates, and are planning a new release of limited editions to make some moolah.

fkrs :D

Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/#findComment-4111053
Share on other sites

Guys,

The reason behind the rule changes, has got to do with IP

and what they believe to be their property.

Nissan and Holden have both filed lawsuits against DPI and in March DPI settled for a sum of close to 2.5Mil

in regards to a claim filed.

NISSAN have claimed IP on:

GTR

35 GTR

GTR 35

R35

Nigel even tried 23 GTR as 23 is Japanese is Ni-San

Fail boat on that one too. DPI was going to take action against Nigel on behalf of NISSAN for the claimed infringement by Nigel.

This has all been worked out now.

But it is only in W.A

As there are already 35 GTR's kicking around with similiar plates as above.

All plates currently out, will not be affected, but new plates will be harder to get through.

Clear as mud

Mike

Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/#findComment-4111666
Share on other sites

I've seen [HOLDEN] before though, guy that owned it also owns a Holden dealership I believe.

Edit: Wtf Bart, that's pretty shit.. Wonder what happened to those who already have [GTS ###] plates then....

Edited by s2k12
Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/#findComment-4112709
Share on other sites

I've seen [HOLDEN] before though, guy that owned it also owns a Holden dealership I believe.

Edit: Wtf Bart, that's pretty shit.. Wonder what happened to those who already have [GTS ###] plates then....

All plates currently out, will not be affected, but new plates will be harder to get through.

Clear as mud

Mike

:banana:

Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/#findComment-4112765
Share on other sites

All plates currently out, will not be affected, but new plates will be harder to get through.

Clear as mud

Mike

If you have good plates out now, you can auction them off for even more now to teh silly people willing to pay! Winnar!

Link to comment
https://www.sau.com.au/forums/topic/234640-private-plates/#findComment-4112853
Share on other sites




  • Similar Content

  • Latest Posts

    • Oh and I lost my headlight washer jet cover!
    • Ok, so I got myself some X1 wheels really cheap to try out, they're a bit different and I like them but they're really narrow (18x8) they are available in staggered 18x8/9 also but really hard to find.  I kinda dig them, but not as much as the F10 19's I usually run, so these go into the wheel pile.   As I mentioned in another thread, I got a new exhaust. It's an off-the-shelf stainless one that fits OH-KAY. I don't love the tips size and how far they come out the back, I think I might cut the tips off and replace with some smaller (~3") ones that don't extend as far. It sounds really good though, I'm not sure if its just in my head but the car feels a little quicker, more responsive.    I fitted an eBay special front lip. Surprisingly it fit perfectly and all holes lined up. Its a little rickety but I haven't put any double sided tape on yet, I want to clean the front bar up where it has scraped the road a lot and fil in the number plate holes (or, get body coloured wrap to cover them - is this a thing?  I'm not sure if I'll leave it gloss or pain it matte. I really like it though, I don't particularly like the front bar without it, I don't really like the M-Sport and to get anything else is just too expensive. That said, I might need a new one now anyway as I dropped the car onto the jack after forgetting to put ramps under the front wheels. It bent a lot and while it did go back to normal after I got the car off the jack, I do fear I have not done it any favours.   Lastly, my headlights died. Different problems in each. They have gotten much dimmer over the past year or so, I put new (uber expensive) OSRAM bulbs in them but to no avail. One of them pointed at the ground and the other just kinda did its own thing with light working sometimes. Yeah, check this 18 year old BMW headlight wire. I reckon I know why they were stuffed.       BTW, the yellow and black is the power to the Xenons. Yikes. I hunted around an researched my options here. I would have loved to just get a replacement harness but not a thing. My car has adaptive headlights, that is they rotate left and right with the steering wheel. Good condition used adaptive xenons were over $700 each, non adaptive were around $400 each, but I couldn't help but think that they're all around 18 years old now, surely they'd have the same problems. So I looked at newer LCI headlights but they were even more expensive and I couldn't confirm that they'd be plug and play with lots of people having lots of opinions so not worth the risk.  I ended up getting brand new Chinese headlights from MARS. They're very close to OEM with only the angel eyes being a bit different. I didnt want crazy turn signals or sharp DRL's or anything. Not my bag.  They're not adaptive, I thought thats a feature I wouldn't really miss. So I coded that out.  The lights are awesome, they look so nice and they take so many years off the car. The angel eyes look great and the headlight brightness is ridiculous. I was so used to the old ones, I didn't realise just how bad they were. The new ones use the OEM bulbs, Xenon ballast and leveller motor which I was happier with. The only issue with them is that the rear cover is held on by SEVEN screws. This will be a nightmare to get to and open when I need to change bulbs.  
    • Now that you mention it I can see those too. More subtle. The lighting and low resolution makes it hard to assess super well what's going on but what is visible is bad enough to pull the motor.
    • I feel like this is due an update
    • Yeah, I wasn't giving two f**ks for the ring running around the bore. I was looking at the vertical scratches running up and down across the hatch marks.
×
×
  • Create New...