Jump to content
SAU Community

Question: Flinders St/williams St. Speed Camera


Recommended Posts

Hey guys,

I'm very curious about something... the other night I was on my way to buy a HDD from someone and saw a flash as I went over a traffic light intersection, anyways, I thought I had gone over it as it turned red as I was looking all over for street names as I was not 100% sure where I should be going...

SO, I received a fine today, it's for the same place, but dated before I went out that night to get the HDD. It's for doing 60km/h in what I thought was a 60km/h zone, but it turns out it's 50km/h, and to be absolutely honest I thought it was a 60km/h zone and I can almost swear that I don't see any signage referring to speed limit leading up to that speed camera, but that could just be me, and I may need to take a drive up there to make sure, hence I'm asking here do I have any contest here? Or was I just retarded and not reading the signs 100% like I should, or is there a blanket speed limit for any city-like area?

More specifically, the location of the camera is here (Williams St/Flinders St).

Seeing as I have fine #2 certainly on it's way, that's 6 points - I have no idea about the demerit system as it's not really my intention to ever have deal with it, so how does this work? From what I know, there's a total of 12 maximum demerits, and after that it's license suspension? I obviously have hefty finage to now pay, which is shit enough. How long do demerits last for before they expire?

Thanks for your help, please no sarcasm or griefers, don't really need that right now. :P

hey dude .um well unfortunatly legaly they dont have to have speed sighns in everypart of a street just like every 600 meters or what ever so that cant be protested against which sux and the road rule is 50km in all built up areas ie ( near houses shoping centres,places where there is a lot of ppl unless otherwise marked..so its pretty hard to dodge the bullet.sorry bro

but dated before I went out that night to get the HDD.

sooo.... they said you were there when you actually weren't? i don't quite understand.. if you can prove that their timing system is out that might help your cause a bit.. but yeah the general rule is 'if there's no sign it's 50'..

bad luck mate, i feel your pain..

Ric

sooo.... they said you were there when you actually weren't? i don't quite understand.. if you can prove that their timing system is out that might help your cause a bit.. but yeah the general rule is 'if there's no sign it's 50'..

bad luck mate, i feel your pain..

Ric

Na dude, I was driving there a while ago before I got the HDD - but never saw the flash during day-time. I have even SEEN people get flashed here at night when I wasn't driving, I just assumed they were going faster than 60km/h :P. So the other fine is definitely coming. As far as I know I've driven by there a few times... so maybe I'm totally fu!ked.

50 in built up areas, blanket and much publicised etc etc. So you cant get away with it.

As for it being not when you thought - i doubt that.

however if you think its wrong go view the photo and you'll be able to see if its your car or not (details are on the back of the form i believe)

+1 - If there's a chance it's not you, go and buy a copy of the photo. A guy from back home got done for using (and speeding on) CityLink with no pass, and the rego on the fine was for his tractor. If the plate's obscured or slightly illegible, they just send it to the closest match.

Otherwise, as said - If it's unsigned, it's 50. So i don't think you've got anywhere to go on that one. And you're tagged with the points for three years.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...