Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

I think what he's trying to say is that he doesn't see the need to run 100RON fuel in an N/A car... Obviously there's N/A Hi-po cars, so if they're after a bit of a safety buffer from knock etc then I'm sure they'd run higher octane fuel....but your everyday N/A car doesn't need 100RON and isn't going to gain anything from it...

yeah of course you wont gain anything, even an turbocharged car gains zero without retuning

but he is wording it as though your fuel lines well melt if you put 100ron with ethanol in an N/A car

my car has been tuned for 100 v-racing (it was a good power gain, just ask racepace) so i been running it for 2 years daily driver...

the car has not missed a beat.

Edited by Jetdat

in all honesty I fail to see how its going to rust out the fuel lines.. Unless the car is sitting unstarted for months, But realistically the amount of ethanol present isnt that high at least not in V power racing.. That E85 fuel I would be more concerned about

Ethanol doesn't rust out the fuel lines... ...I'm pretty sure that "opinion" came from people using Bio-Diesel containing Ethanol as the "active" ingredient, where it was cleaner than normal Diesel and would clean out the fuel systems... ...Which meant you'd have to keep changing the fuel filter until the fuel system was clean and the injectors would sometimes clog...

Ethanol can eat through the materials that are used for gaskets... ...Ie. paper, rubber, silicone, cork, felt, neoprene, nitrile rubber, fiberglass, or a plastic polymer...

Just like rubbing alcohol can eat away at the surface of a CD... ...Ethanol eats away at the gaskets depending on what they are made of...

And while ethanol won't do much to most metals... ...I think (I was never good at high school Chem) ethanol can eat away at iron... ...but it isn't technicality "rust" as such because I don't think it is classed as oxidation because most alloys that engine parts are made of are resistant to oxidation... ...the ethanol is just picking on the iron parts...

I hope that kinda makes sense... ...I haven't studied in about 10 years... ...So I could be totally wrong and talking out of my ass...

yeah of course you wont gain anything, even an turbocharged car gains zero without retuning

but he is wording it as though your fuel lines well melt if you put 100ron with ethanol in an N/A car

well my wording must be a bit misleading, sorry. The point im trying to get through is what dez stated.

You will gain nothing from running that fuel in a NA.

I just went on the United website and they are bringing out a new fuel, Premium 100.

I think I will try this out when its avalible, depending on price.

Have a read>> http://www.unitedpetroleum.com.au/index.asp?pgID=65

I have recently changed from BP Ultimate to Shell V Power Racing and it is definitely a superior fuel. Where as my car used to sometimes get knock up around 6,000rpm now I don't get any knock. It also makes the car feel more responsive.

It's good to see that United is bringing out a 100 RON fuel as I didn't want to have to go back to BP Ultimate!

Just thought I would let you all know Ashburton Shell sell V Power Racing for 1.69 a liter and the price hasn't changed at all over the past 3 weeks. Hence when ever its high price time the extra coin for V Power Racing is only about 9.5-15c a liter over regular fuel. What a bargain! I went to a Shell on Burwood Hwy and V Power Racing was like $1.85 a liter

  • 3 months later...

you can put standard unleaded in an n/a and turbo skyline (Gts, GTST, heck even a GTR if you like)

in all cases the car will run, start and drive fine

once you load it up, it will detonate, the ecu will see this via the knock sensors and it will run a low octane timing map

so the car will be sluggish and perform like poo basically

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After drying a few days, time to put her back together 
    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
×
×
  • Create New...