Please help!!! R33 airbag light stays on after car repair

[ylwgtr2]

if you got single airbag.....the seat belts have no part in the system the module may be in the steering wheel itself(it is in the GTR's) next would be do a continueity (sp?)check between all the wires in the sytem

[DentonR33]

i have a series 2 gtst, so i have both passenger and steering wheel air bag.

I have seen the wires that go under the seat to the seatbelts

[ylwgtr2]

well that being the case the sensor is under the console.....behind the hand brake mechanism....so clear out the code if that doesnt work do a continuity check(all the wires that go into the airbag sensor module are green!so you have to probe one then probe all the inputs to find which one is which....make sure you disconnect ALL the componants to the system while doing this and disconnect the battery aswell)After making sure the wires are all good,replace te airbag module....

[ylwgtr2]

oh and the wires that co under the seats are not the ones....they are for the seat belt stork....the ones you need go to the retracting unit behind the inner trim