Help Needed With R33 Rb26dett Ecu Wiring Pin / Wire Colours

[YO880]

Hi guys,

I am attempting to rebuild the ECU connector on my RB26DETT. As you can see from the photo's, it has been quite severly damaged, luckily the plastic took most of the damage, and most of the wires are intact.

I got a connector off an RB25 loom, and have connected 3/4 of it all. The section i have left, i have no idea of what colours go where..

Can anybody have a look at theirs and send me a list of the wire colours vs Pin numbers?

my engine is an R33 RB26dett.. the R32 wiring colours are different.. so please only list ones from an R33 RB26.

Needed Pinouts 1-20 (which is on the inside of the larger pins), i have attached a pin numbering diagram too

The colours i have to find are (short cables):

* Blue / Brown

* Blue / Red

* Yellow / Blue

* Green / Red

* Black / Yellow

* Grey / Black

* Brown / Red

(Longer cables)

* Light Blue

* Purple / White

* Black / Pink

* Orange

* Blue / Yellow

* Blue / Black

* Black / Yellow

I intend to write up a full colour code vs Pin vs function when i have them all (for verification and for future help of others)

Thanks Guys, i appreciate any help

[YO880]

For reference.. i think it is numbered reletive to my picture 3 as:

Left Top in the picture is pin 101

Left bottom in the picture is pin 109

Right top int he picture is pin 50

Right bottom in my picture is pin 60

in effect, teh harness needs to be flipped over and seen from behind

atleast i think it is read that way