Jump to content
SAU Community

Recommended Posts

so these will change the lower light in the headlight.. the one which doubles as the fog lights? i managed to not have my normal driving lights changed during compliance but the light below (Fog Light/highbeam) are abit yellowish in comparison

Link to comment
https://www.sau.com.au/forums/topic/235261-piaa-h4-globes/#findComment-4121426
Share on other sites

so these will change the lower light in the headlight.. the one which doubles as the fog lights? i managed to not have my normal driving lights changed during compliance but the light below (Fog Light/highbeam) are abit yellowish in comparison

ok, For my car, The normal low beam should have a D2R HIDs on it but due to compliance, they change it to a H1 normal halogen bulb. As for the high beam, it's the original H4. If you on the high beam, both the high/low on the H4 will light up. If you have the lower light with the fog light option, Good. For me, nothing turns on when I switch on the fog lights. These PIAA bulbs are original PIAA from Japan. I manage to get them cheap, therefore I can offer them to you cheap too. it's easy more than AUD100 selling outside.

Link to comment
https://www.sau.com.au/forums/topic/235261-piaa-h4-globes/#findComment-4122742
Share on other sites

On this note, how exactly do you replace the bulbs? I had a quick look the other day (admittedly in poor light with a torch) and I couldn't see where the bulbs plug in. In fact, I'm not sure there was any space to put a hand in behind the lights. Do you have to remove bits to get at the lights?

Link to comment
https://www.sau.com.au/forums/topic/235261-piaa-h4-globes/#findComment-4124315
Share on other sites

if sedan - raise car off ground. pull off front wheels pull inner guards loose and there ya go.

if coupe - remove front bar then remove headlight assy.

Hei Chris, you have not reply my massage. So what'z going on? Can you still help me?

Link to comment
https://www.sau.com.au/forums/topic/235261-piaa-h4-globes/#findComment-4129650
Share on other sites

with your fog lights - pop the cover off the back of the stalk and plug them back in.

regarding the airbag light. no - the fellow is away for a few weeks.

Hi Chris,

I manage to take out the light stalk, but I didn't find anything amiss. The wire is intact connected. Can you fix it for me when you the the airbag reset thing.

post-53067-1221472094_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/235261-piaa-h4-globes/#findComment-4134205
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Um. No. Since Matt introduced the TIM it has become a lot easier to deal with the consequences of changing K for AFM and injector swaps. Then, tuning is a f**king doddle. No-one needs to know or care how many grams of air are flowing or any other bullshit. Need more fuel in a cell? Add more fuel. Need more timing in a cell. Add more timing. Need to adjust any of the other tables for warm up and so on? No harder than anything else. Sure - it's not an ECU system for starting from scratch on an arbitrary engine. But then.....it was never supposed to be, not recommended for, and almost never used that way. So.... On your engine, in particular, Nistune/Nissan OEM is about as sophisticated and difficult as banging 2 rocks together. Those ECUs are primitive and simple. There is nothing difficult there. I learnt Nistune from scratch, created new maps with extended axes, interpolated/extrapolated the original maps onto them and tuned my RB20 (basically the same ECU as your 26 ECU) all by myself, more than 20 years ago. And that was long before even TIM.
    • Set of knee pads for a R34. Will fit every model I think. Comes with everything except the rubber covers for the bolt holes. Still in great condition. You will need to drill holes to mount these or use double sided tape. I can do free shipping and will be shipping from the Netherlands with tracking.
×
×
  • Create New...