Jump to content
SAU Community

Piaa H4 Globes


Recommended Posts

so these will change the lower light in the headlight.. the one which doubles as the fog lights? i managed to not have my normal driving lights changed during compliance but the light below (Fog Light/highbeam) are abit yellowish in comparison

Link to comment
Share on other sites

so these will change the lower light in the headlight.. the one which doubles as the fog lights? i managed to not have my normal driving lights changed during compliance but the light below (Fog Light/highbeam) are abit yellowish in comparison

ok, For my car, The normal low beam should have a D2R HIDs on it but due to compliance, they change it to a H1 normal halogen bulb. As for the high beam, it's the original H4. If you on the high beam, both the high/low on the H4 will light up. If you have the lower light with the fog light option, Good. For me, nothing turns on when I switch on the fog lights. These PIAA bulbs are original PIAA from Japan. I manage to get them cheap, therefore I can offer them to you cheap too. it's easy more than AUD100 selling outside.

Link to comment
Share on other sites

On this note, how exactly do you replace the bulbs? I had a quick look the other day (admittedly in poor light with a torch) and I couldn't see where the bulbs plug in. In fact, I'm not sure there was any space to put a hand in behind the lights. Do you have to remove bits to get at the lights?

Link to comment
Share on other sites

if sedan - raise car off ground. pull off front wheels pull inner guards loose and there ya go.

if coupe - remove front bar then remove headlight assy.

Hei Chris, you have not reply my massage. So what'z going on? Can you still help me?

Link to comment
Share on other sites

with your fog lights - pop the cover off the back of the stalk and plug them back in.

regarding the airbag light. no - the fellow is away for a few weeks.

Hi Chris,

I manage to take out the light stalk, but I didn't find anything amiss. The wire is intact connected. Can you fix it for me when you the the airbag reset thing.

post-53067-1221472094_thumb.jpg

Link to comment
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
    • You need the kit turbo taipan has shown you because that manifold ia designed have side feed injectors 
    • @johnnysr22 did you end up installing the little screen thingy and did it work ?>   
    • There is a LOT of stuff that can be done, it all depends on how much time and money you want to spend on doing in.  Not all ECUs will be able to do it, and the more control you need the more time and knowledge needs to be put into making it work.  If you're willing to spend the time and money and have the right hardware and skills involved there's a lot that can be done. 
×
×
  • Create New...