Ecu Correct One?

[Hunting Lions]

the remap in the r32 gts4 that i bought is dodgy. it doesnt really idle properly and never has and it has started overloading the engine with fuel so i m sourcing another one .

i m just no sure whether all standard comps match all standard r32's.

mine is a manual turbo and the person that i m sourcing it off sent me a part number being

23710 11V10 MEC-R213 B 3211

i have been looking online for about 2 hours with absolutely no luck.

any help would eb appreciated

[Johnny]

Perhaps you should get someone to remap the ecu correctly, if your in melbourne you can try dr drift. Hes been around for a while and is very good at tuning factory ecu's.

[QWK32]

that one will work. i had a couple of different ones that worked in my 32. one of them was that number, with the MEC-213 chip and the other had a MEC-126 chip. both worked fine in my 92 model R32 with RB20DET manual. the ones with the MEC-213 chip are the newer model ones, around 92 models.

[Hunting Lions]

that one will work. i had a couple of different ones that worked in my 32. one of them was that number, with the MEC-213 chip and the other had a MEC-126 chip. both worked fine in my 92 model R32 with RB20DET manual. the ones with the MEC-213 chip are the newer model ones, around 92 models.

it is an 89 but its a gts4, i ve been told anyways that is all controlled seperately, the comp i have sourced is costing 65 and i ve got some injectors ready and waiting for 20 .

its just going to be a pain pulling out tha 550 sards putting the standard ones back in with the standard comp and hoping for tha best cos i m only gambling that it is the remap

[bozodos]

yeah the ecu's are common, I recently lent mine to a mate with a GTST cause his was stuffed, ran fine, the ATTESSA is run by a seperate computer, so the engine etc is all the same.

[KiwiRS4T]

the remap in the r32 gts4 that i bought is dodgy. it doesnt really idle properly and never has and it has started overloading the engine with fuel so i m sourcing another one .

i m just no sure whether all standard comps match all standard r32's.

mine is a manual turbo and the person that i m sourcing it off sent me a part number being

23710 11V10 MEC-R213 B 3211

i have been looking online for about 2 hours with absolutely no luck.

any help would eb appreciated

That ECU number you have quoted appears to be for an auto.

Ref http://www4.wave.co.nz/~lakewood/Skyline/E...ntification.txt

but to get the correct ECU for your car you need to go on this site to "Vins you want fasted"and someone with access to the Nissan's "FAST"system will be able to give you the correct number for your car's ECU if you give them the number from the ID plate on your car.