Jump to content
SAU Community

Recommended Posts

With the September Tampered Motorsport Track day being fully booked out, we have booked another date on Saturday October 11th.

Entry Fee: $150 which includes Timing costs.

Spectators are more than welcome, and there is no cost to come and watch. Also you can go for a ride in the cars but you must sign on with a Passenger indemnity first. Due to the amount of passengers at previous events our insurer has put a small levy on passengers of $10. You can just pay this when you sign the forms at the Scruitineering office.

The day will kick off when scruitineering starts at 7:30am. You will need to do your paper work at the scruitineering office before you have your car checked. Please make sure you have removed all loose items from inside the car.

At this stage the day will be limited to 60 places, with 5 groups of 12 cars and entries are accepted in order of receipt. We may extend this to accomodate the interest.

YOU WILL NEED:

Long sleeve and long pants of non flammable materials i.e. No Nylon

AASA license which can be bought on the day for $50 (these last for 12 months) or CAMS L2S

Closed footwear

Helmet that complies to Australian Standards (has ASA or Snell Sticker)

Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure.

Good condition tyres

Working seatbelt (give it a pull and make sure it locks)

All people wishing to attend need to make payment to the specified bank account. When you send your email with your details you will be sent an entry form as well as payment details. You will need to email the following details

Forum Username or Nickname:

Full Name:

Email Address:

Mobile Phone Number:

Car Make & Model:

Capacity:

Previous best time at Winton:

Forum/Workshop you are a part of:

SO IF YOU ARE WOULD LIKE TO COMPETE EMAIL YOUR DETAILS TO

[email protected]

Just a reminder that Tampered Motorsport will also be holding track days on the following dates:

Winton Motor Raceway - 4th November (Melbourne Cup Holiday)

Winton Motor Raceway - Short Track CHRISTMAS PARTY - 21st December (BBQ Lunch provided)

More details on those two events to follow.

Cheers,

Adam

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...