Jump to content
SAU Community

Recommended Posts

I'm having a shitty lazey day i have read heaps and done a few searches for key words like eye, saddle, fork etc and i cant find any thing that just answers this question.

This is the email i got in regards to my 97 S1 suspension i wish to purchase.

"Firstly I need to know what rear bottom mount your Stagea has. Is it a saddle mount |_| or eye mount 0.

We have a good seconhand set of Tein HR for $950 with the eye lower rear mount and a set of Tein Super Wagon for $1400 with the saddle lower rear mount.

The Super wagon will be the softer set out of the two, although the HR will still be fine, just a little firmer.

Let me know what you have in the way of lower rear mount and we can go from there."

can any one shed some light for me and also has any one used these before and if so how low can i go and what is the ride like stiff or nice etc....

Edited by loymclure
Link to comment
https://www.sau.com.au/forums/topic/235402-fork-or-eye/
Share on other sites

if u stick ur head under the rear of ur car have a look at where the shocks mount to the hub it will have either 1 of the 2 types that u listed. The saddle or fork type will look like 2 plates of steel welded to the bottem and fitting over the hub. The eye type wont have the plates but will fit in between the hub and the bolt goin through it. hope this helps

Link to comment
https://www.sau.com.au/forums/topic/235402-fork-or-eye/#findComment-4122042
Share on other sites

clint look a couple of posts down( sk's suspension group buy,all will be revealved) and think twice about 2nd hand shocks, and i think you will find s1,s have eye and bushes(apart from 260,s)

Link to comment
https://www.sau.com.au/forums/topic/235402-fork-or-eye/#findComment-4122078
Share on other sites

clint look a couple of posts down( sk's suspension group buy,all will be revealved) and think twice about 2nd hand shocks, and i think you will find s1,s have eye and bushes(apart from 260,s)

yeah the bloke did say second handies were the fork type. but im guessing the super wagons are new. and they are the eye type wich is what i need. now i did read the group buy thread and it just has Sk saying

"Hi Brad, no problems getting the rear Bilsteins with forks (instead of bushes), the price is pretty much the same. I don't know how long I can keep up the Group Buy, it depends on how many people take it up. At least a month I would say judging by the early interest."

but he doesnt say if its for s1 or s2

Link to comment
https://www.sau.com.au/forums/topic/235402-fork-or-eye/#findComment-4122098
Share on other sites

It's simple, when they are standard;

S1 autos are all bush style, there aren't any S1 manuals except for 260RS's which are fork same as GTR.

S2 autos are all bush style, S2 manuals are fork style as are 260RS's.

Of course when people do conversions, auto to manual, RB25 to RB26 etc they may also change the rear cradle. So if you have a converted S1 or S2 it pays to look first before buying.

Some advice, stay away from second hand Jap stuff that is designed for sedans or coupes, they never suite the waggon style. In fact even the waggon stuff doesn't suite our roads at all.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/235402-fork-or-eye/#findComment-4122962
Share on other sites

It's simple, when they are standard;

S1 autos are all bush style, there aren't any S1 manuals except for 260RS's which are fork same as GTR.

S2 autos are all bush style, S2 manuals are fork style as are 260RS's.

Of course when people do conversions, auto to manual, RB25 to RB26 etc they may also change the rear cradle. So if you have a converted S1 or S2 it pays to look first before buying.

Some advice, stay away from second hand Jap stuff that is designed for sedans or coupes, they never suite the waggon style. In fact even the waggon stuff doesn't suite our roads at all.

Cheers

Gary

cheers mate, i would of gone with your set up but i sent a message ages ago and never got replied to. so i was forced to have a scout around not sure if ull read this but can you send us a quote for a complete setup if you still sell them. or maybe even start a new group buy thread or something. ill go for what ever is practicle and affordable. cheers clint.

Link to comment
https://www.sau.com.au/forums/topic/235402-fork-or-eye/#findComment-4123125
Share on other sites

cheers mate, i would of gone with your set up but i sent a message ages ago and never got replied to. so i was forced to have a scout around not sure if ull read this but can you send us a quote for a complete setup if you still sell them. or maybe even start a new group buy thread or something. ill go for what ever is practicle and affordable. cheers clint.

We are currently suffering from out of stock on some springs, some alignment products and some shocks absorbers, which is holding up about 20 deliveries, some for over 6 weeks. So we haven't been taking new orders, it's not fair on the guys who are waiting on their stuff. Springs are gradually arriving, they are made in Europe, so delivery takes time. The bush production is getting back on stream after the amalgamation of the Noltec and Whiteline alignment products, the new combined range is called Whiteline Plus. Some are due this/next week. That leaves us with a few kits that will be waiting on selected Bilstein part numbers. I am on the suppliers case daily as many of the guys are, understandably, getting impatient and they send multiple PM's every day, this fills up the inbox faster than we can reply.

It's a temporary situation caused by a number of unrelated issues, once we are passed that we will take some new orders. The bonus is there are a number of new and improved products that we will be able to include in the various Group Buys.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/235402-fork-or-eye/#findComment-4125510
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...