Jump to content
SAU Community

Recommended Posts

Yesterday went to Turbotune in Adelaide to fix a spluttering problem my car has had for a while. Thought it could be either a fuel pump problem or a coilpack. After an hour and some tests, ended up being a faulty coil pack. So happy to get that fixed coz it was driving me crazy. Then we dynoed it and I was shocked to see 201.2rwkw. Only mods are dump/front pipe, hks cat back, fmic, no boost controller but there was a boost increase to around 11.5psi. I was wondering if anybody made similar sort of power with or without boost controller. Will put picture of dyno when I get a chance to scan.

Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

to me that dyno is reading a wee bit too high

i had my car dynoed at Willall Racing and they use a mainline dyno

with a front mount, boost increase to 9psi, full zorst, splitfire coilpacks, pod....my car made 188.7 rwkw on a reasonably warm day

so from the mods that you are saying you have i would expect the same sort of power that my car has pulled out

plus no boost controller and ur hitting 11.5psi....umm have you had that reading out off a boost gague or from the stock gauge.

Edited by Krishy
Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123368
Share on other sites

damo had 2 dyno results from 2 different places.....

autosalon dyno if i remember correctly he made 161 something rwkw

and at southern hi tech dyno he made 184.2rwkw

that alone tells you that every dyno is different

Edited by Krishy
Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123473
Share on other sites

Only mods are dump/front pipe, hks cat back, fmic, no boost controller but there was a boost increase to around 11.5psi. I was wondering if anybody made similar sort of power with or without boost controller. Will put picture of dyno when I get a chance to scan.

You WOULD have about 200rwkw if there was an aftermarket computer or your ecu has been remapped........

Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123484
Share on other sites

my 33 made 192kw with just a pod and turbo back three inch exhaust. i fitted the FMIC and it automatically pushed the boost up. final result is 205.4kw on 10psi :blink: ... i'm stoked:) oh and im running stock ECU and no boost controller

Edited by IZZMO 33
Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123529
Share on other sites

Southern Hi Tech: 182.4rwkw

Autosalon: 165rwkw

I got the lighter wheels back on and have a dyno day at graham west next month. im very interested to see what it pulls now, although i may have a few goodies on by then so the comparison wont be that accurate.

At autosalon in 4th it was hitting speed cut on the ctock ecu but hadn't maxed the revs yet, but at southern hi teech it reached max revs, so i guess each dyno is calibrated differently.

Edited by Damo_R34
Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123552
Share on other sites

my 33 made 192kw with just a pod and turbo back three inch exhaust. i fitted the FMIC and it automatically pushed the boost up. final result is 205.4kw on 10psi :blink: ... i'm stoked:) oh and im running stock ECU and no boost controller

same goes here, i achieved quite a boost increase after installing FMIC. Around 12psi. no aftermarket boost controller, and what appears to be the standard ECU. Same other mods that IZZMO mentioned - pod, turbo back exhaust.

She's running pretty nice.

Next thing i'll be adding is better coil packs - my oem ones are pretty fried.

Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123577
Share on other sites

Mainlines do read lower due to their more accurate correction factors but this is widely know, so you can compare DD figures to DD amd mainline to mainline but can't really compare them against eaach other.

I fitted the exhaust and cooler to this car, there was also some cat "modifications" so the boost increase is due to the increase in the exhaust flow.

The boost reading is off the MAP sensor on the exhaust.

I would say that the figure is pretty accutre due to how i only just pulled away in my lighter 180 which was running about 205kw(14.5psi) at the time when we had a run on the freeway on the way to Mallala (kept it under 110 of course).

As cubes and Jeff said prehaps it's just a freek.

Edited by D_Stirls
Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123645
Share on other sites

Where there is a boost jump it should only jump to around 9 or 10psi. Most 33's do that with those mods, but I think there are some that just might do crazy things and jump to 11 or 12 psi like mine and I dont know why, maybe just lucky. Plus turbo tune had just finished having they're dyno serviced on monday, so dont think the dyno is a problem.

Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123646
Share on other sites

damo had 2 dyno results from 2 different places.....

autosalon dyno if i remember correctly he made 161 something rwkw

and at southern hi tech dyno he made 184.2rwkw

that alone tells you that every dyno is different

auto salon was dead on actually. i had just got my car dyno tuned at boost worx a week prior and it made 2kws more than it had been tuned for.

anywho.. i dont find it hard to believe 200. i mean 11.5 is lot of boost for a rb25.

Link to comment
https://www.sau.com.au/forums/topic/235496-dynoed-my-r33/#findComment-4123650
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
    • I say it often, none of this stuff is really Skyline-specific per se. But in general there's not a lot of people who actually know what they're doing. A lot of people charging like they do. Agile software development probably isn't the greatest idea for an engine controller.
×
×
  • Create New...