Jump to content
SAU Community

Recommended Posts

Short version of story:

Been yellow stickered. They don't believe this is the stock turbo. Have to prove it, otherwise have to have emissions test.

So, here's the pictures. The car is a 1989 cefiro. Still has rb20 in it. I'm pretty sure the stock turbo is the T28, but I can't find any markings on the turbo to prove it. Apparently the huge amounts of rust isn't enough proof of its authenticity. I can read two of the markings. One has X19A on it, and the other has 2IU. No idea what they mean though.

img2143fd0.jpg

img2140kj4.jpg

img2137qg5.jpg

anything I should be looking for to prove that it's the stock turbo?

Link to comment
https://www.sau.com.au/forums/topic/235504-what-turbo-do-i-have/
Share on other sites

Short version of story:

Been yellow stickered. They don't believe this is the stock turbo ......Apparently the huge amounts of rust isn't enough proof of its authenticity.

The sad thing is these people are out there breeding :P You've been done by a complete c$#t, I'd ask for proof of their IQ (or lack of)

f**ked up, isn't it. They say because I have a blowoff valve on, that I OBVIOUSLY have a larger turbo installed too, therefore needing an emissions test.

Just called up a place called TurboTech, in perth, and they say that the stock turbo on all rb20det's is a hitachi HT18. Any confirmation on this?

Just talked to a nissan dealership person over east, who assured me that almost all the nissan turbos are Garrett. However they have used Hitachi on a few. No real help there. Come on, surely someone has to have a reliable source of information as to what the stock ceffy turbo is!

NEW UPDATE:

Here's a list of the responses I've got:

Turbo Tech: hitachi ht18

C-red: Garrett T3

Tanaga Motorsport: maybe T28, not sure though

MTQ turbos: t3 t4 hybrid maybe

Xspeed: hitachi. he sounded very sure of himself

Kensei Garage: garrett t3 (maybe)

Edited by scottrichards

The people who hand out the permits. the Tech department. They're the ones who want proof. Can't really get much better pics than that without taking it out ey. That's alot of effort. And i'm not too much of a fan of effort. I'm taking it to a turbo place tomorrow (hopefully) who will be able to identify it for me.

I'm also just going to remove the blowoff, so incase I don't have a stock turbo, they don't have any reason to suspect that it isn't stock at all. Removing the BOV will be a shit of a job though, as they bolted it together, THEN welded it on, making getting to the alan key bolts near impossible.

Jerks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...