Jump to content
SAU Community

*****need Help Finding Someone To Install N1 Turbo's At A Good Price Please Help Me******


Recommended Posts

Hi all as the topic sais i am getting N1 Turbos for my R32 and got a quote for $800 to Install them and another $250 to tune the car but i did not know that N1's would cost so much to install as they are direct bolt on.

If anyone knows a Good Tuner to go to that installs cheap can you please let me know asap as i need this done soon and i am located in the south eastern suburbs of Melbourne so Dandenong, Morrabin, Cheltenham etc.

I would do this my self but i am in the Process of Spraying the car so i don't have the time and effort to install them i want to spray it and drop it off so any help would be greatly appreciated

thanks.

Yeah installing turbos ain't that cheap. Can't remember how much i paid. It was less than $800 i'm sure but not that much cheaper. maybe $600 + gaskets.

Edited by jantolis

$800? Your lucky it wasnt $1000 to be honest. $800 is cheap

Just because they are bolt on, does not mean its a 30 second job.

You have to take the intake setup off... front pipes off, then the rear dump, rear turbo, front dump, front turbo

And then reassemble in the order you took it all off and fix up anything that might be a miss in the process (gaskets, damaged vac hoses, poor condition hoses in the area while its apart etc etc)

So simply put, not a simple or fast job by any means.

You should try and do it yourself IMO, and then you'd see that $800 is more than reasonable for such a pr|ck of a job :P

$250 to tune also sounds too cheap IMO.

250 is what i got it dyno'd for the first time from this guy he just started off but he is very good all his equipment is new so its good and he knows what he was talking about.

I need to know other tuners in my area not if im paying to much or if anyone thinks 800 is a good price just need some numbers of shops or advice from people who have actually had N1's installed ?

when he says i think he just means a check to make sure the turbochargers are working and everything is ok

so basicvally just a health check once the turbochargers are fitted

this assumes you have the standard ecu?

or does he mean a touch up of your aftermarket ecu?

when he says i think he just means a check to make sure the turbochargers are working and everything is ok

so basicvally just a health check once the turbochargers are fitted

this assumes you have the standard ecu?

or does he mean a touch up of your aftermarket ecu?

NA i have a power FC he tuned it for me for 250 last time but the turbos im buying are getting built atm i just need to know if anyone has done this upgraded to N1 and how much it cost them and what else they had to do to their car i want to get cam gears all i have is:

Power Fc

Cat Back

And i had a rebuild a while back now im maxing out my turbos and they dont have much life left so i want to upgrade before they blow up and cause more problems later on .

Mate have you read half the posts?

$800 - IS CHEAP AND REASONABLE from people who've PAID to have it done or know people/workshop pricing etc.

Why are you still asking about them... i dont get it. $800 is fair, pay the price.

im not happy with 800 i dont care i will pay 800 i wanted to know how much they payed to get an idea of how much it costs i know im getting a good price i just need to know what else i need to do im waiting for people to reply who own GTRs but thanx anyway mate

to be honest even i would not charge less than 800.... even then there is no way im gonna tune it for 250..... id probaly qoute $1200 (with PFC tune) drive in drive out.... my tuning alone is worth $550 and up on a setup like that especially considering i have more work than time.... all work is done on probably the best dyno in Vic.

Edited by URAS
to be honest even i would not charge less than 800.... even then there is no way im gonna tune it for 250..... id probaly qoute $1200 (with PFC tune) drive in drive out.... my tuning alone is worth $550 and up on a setup like that especially considering i have more work than time.... all work is done on probably the best dyno in Vic.

best dyno in vic? thats a pretty big statement well maybe ill give you a try send your details and to me and ill come down?

Yeah $250 for a PFC tune is too cheap, they arent doing a full tune.

Your talking $600+ for that

If your not happy with $800 for a full turbo swap out... then you shouldn't own a GTR.

Turbo swaps are the least of your worries :)

^ No its not. Its time, patience and a 1/4 drive socket set.

Mate Ash has summed it perfectly, so dont just 'thanks mate' and disregard his posts.

He knows plenty more than most on here who actually own GTRs. One of them is you.

800+ is the going rate. Thats it.

Doing the turbos on the car isnt that hard if u have the right tools, i ve done a few of these only take 6-8 hours to complete (with air tools )

800 is to cheap i wouldnt do it at my workshop for that cheap, and yes i own a gtr lol

im not disregarding no ones comments im open to hear suggestions i hate opening a thread on these forums because i ask for one thing or friendly advice and all i get is people coming on who have to add their smart ass comments i didnt ask for peoples opinions i asked for peoples help and thank you for the people who gave me help im happy with 800 i think 800 is cheap and i will pay 800 i just asked what others payed and they told me so thank you for all your help

Bel Garage charged me $500 a couple of months ago for the same job.

oh ok no shit? thanx man where abouts is that is it in Melbourne?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...