Jump to content
SAU Community

Headporting 5 Axis Cnc

wolverine

By wolverine,
in Engines & Forced Induction

 Share

Recommended Posts

wolverine Grand Master

wolverine

Posted
Posted

Here is a link to a video of the machine at work.

5 Axis Headport Video

It is interesting (for a non industry person) to see the bit being held still while the whole head is rotated. From memory there was a thread about this going back 2 or so years ago but nothing came out of it.

So i haven't seen any local information on who offers this in Australia. However, if the gossip is correct then Trick and Mansweto in Sydney may be the people to speak to about this.

Link to comment
https://www.sau.com.au/forums/topic/235816-headporting-5-axis-cnc/
Share on other sites
juggernaut1 Proficient

juggernaut1

Posted
Posted

Kostecki engine centre in Perth do cnc porting - unfortunately no programs for jap stuff so I am told.

I got quoted $3,300 for my sr20 head through someone my tuner knows on the eastern states. He mentioned they do the v8 supercar stuff. However, it took months to get the quote by which time I had the head hand ported.

Martin HKS Enthusiast

Martin HKS

Posted
Posted

Performance Wholesale has 3 x 5-Axis Deckel Maho CNC machines along with 2 x Newen Epoc Contour Machines for bowl/seat work and also Renishaw Digitizing Machine. Not to mention Flow Bench, Cam Doctor, Digital Valve Spring Tester, Spintron machine etc etc. I'm pretty sure they are booked months in advance for work.

Cheers

Marty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Rebuilt Rb25det issues

      By GTSBoy · Posted

      Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Victory
      Neil's R33 Gts-t Build

      By Victory · Posted

      Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Milkmun
      S15 Spec R

      By Milkmun · Posted

      Wow that's a steal, you've done well there. 
    • trey318
      r34 gtt led globes

      By trey318 · Posted

      Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • KyoyaR33
      Rebuilt Rb25det issues

      By KyoyaR33 · Posted

      Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
×
×
  • Create New...