Rear Lower Control Arm Bushing

[LBG]

I've just pulled out my rear lower control arms and burnt out the old bushings to replace them with some Nolathane ones. The part number is 46216 if that helps anyone.

Now the problem that has come up is that the Nolathane bushings aren't a snug fit in the actual control arm. They have movement, as in I can move them in a circular motion when both sides and the crush tube are in. The next problem is that when they are sitting in the control arm they are now too wide to fit the brackets on the subframe which leads me to believe they are the wrong bushings.

Anyone had this issue before or know which are the correct bushings to order? My car is sitting up on stands now with no rear control arms and no bushings in the control arms so I can't put the f**kers back in to drive it. ><

The car is a 1990 R32 Skyline 4 Door also.

Edited September 12, 2008 by LBG