Jump to content
SAU Community

Recommended Posts

hey guys

hopefully someone can help me out

was driving home just now and it was raining

put my foot down a bit and hit the limiter in second and when i changed to third and tried to keep driving at a normal pace

i hear a high pitched whistling noise and i cant make the car rev over 2000 rpm in any gear

i was thinking that i had blown off a pipe somewhere but when i got it home into the shed there are no pipes coming off

and when i rev it i can hear the high pitched noise coming from the pod filter

but on idle the car sounds normal, no metal sounds to indicate a turbine wheel etc

and theres no black smoke when i rev it

any one have an idea?

cheers

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/
Share on other sites

all the cooler pipes are on and theres no leaks

sadly it is the turbo :laugh:

had a look today

the intake wheels bearing is stuffed

the turbo still spins but doesnt make much pressure

i took the cooler pipe off just before the cross over pipe and can feel it blowing air through and can hear the sound from the turbo echoing up the pipe

the car will rev if its in neutral but wont move properly when under load

looks like its new turbo time

anyone have a turbo i can buy?

need a direct swap for the stock rb25 turbo

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4130337
Share on other sites

anyone have a turbo i can buy?

need a direct swap for the stock rb25 turbo

I've got a stock rb25 turbo off a series 2 33 I've just taken off. Assume it's in good condition, ran fine while it was on but i've got no idea how to check. Let me know if you're interested.

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4131859
Share on other sites

hey there, mate i think i got the same problem, ive just change my spark plugs to bcp6res ones and now when i put my foot down slowly... i can hear a wierd strange high pitched whissle, could it also be the blow of valve?

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4132186
Share on other sites

my r34 has the same high pitched sound at the moment sounds like it from the vicinity of the turbo mine still makes boost thou 10psi but it screaming, screech sound is terrible......i thought it mite be a boost leak but i aint found it......

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4133036
Share on other sites

i have been told it might be an exhaust manifold leak may need a gasket?? hopefully turbo not on its way like the thread starters car........ i dont really have the patience to pull the thing apart.... time to take it to a workshop.....the joy of turbo cars ! hehe

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4133136
Share on other sites

Damn mine blew about 2 weeks ago but it's all up and running again. They must all be throwing the towel in these days.

It's not that hard to change the turbo if you get another standard one. Could do it in an afternoon. With that said a workshop probably wouldn't charge that much if it only took an afternoon so.. Just do it yaself and learn lots along the way;)

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4135301
Share on other sites

Grab a hold of the shaft and try and pull and push it and see if there's any movement that way or side to side or anything. Also check how freely it spins and if there's any bearing noises or vibrations as it turns:)

Edited by JET-25L
Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4135308
Share on other sites

Damn mine blew about 2 weeks ago but it's all up and running again. They must all be throwing the towel in these days.

Its probably this crap fuel they are all slowly fazing in without us knowing. All upping the ethanol levels or something...

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4135363
Share on other sites

Its probably this crap fuel they are all slowly fazing in without us knowing. All upping the ethanol levels or something...

wtf does that have to do with turbos dying?

My 25 turbo is still going strong, it spent about a year at 12psi on an RB20 and nearly another year on an RB30!

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4135417
Share on other sites

Just something on the bcp6es plugs... i had the iridium version of these in my car originally... then changed to the $4 BKR6E plugs with a smaller gap and it ran so much better. I always use these plugs now and i recommend these to anyone that brings an rb25 into my work.

rgr34 a whistling noise is usually a vacuum leak... doesn't necessarily affect idle too much but when you get up it it will be easily noticeable. Does it struggle to make that 10psi now? I'd be checking everything carefully and making sure it's all legit.

If you've got a leak between the turbo and manifold you should be able to hear air blowing out of it or heaps louder exhaust noise from the engine bay. Good luck!

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4137248
Share on other sites

the noise i have is like a supercharger, a winning noise... its really wierd...

I had a FMIC and EBC installed, and boost upped to only 9 psi. Since then I've had a similar sound, when i hit full boost i can hear a metalic whining sound, similar to a supercharger sound. Not sure if the turbo is bad or if its just the sound resonating through the new cooler.

Link to comment
https://www.sau.com.au/forums/topic/235847-blown-turbo/#findComment-4139110
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...