Jump to content
SAU Community

Willall Racing Buys Australia's First Official Complied/street Registered R35gtr


Recommended Posts

  • Replies 271
  • Created
  • Last Reply

Top Posters In This Topic

Serious question, because no ones really mentioned the 35 in drag yet, and we know what the Willall boys like to do :)
Donut King did paint theirs pink, I'd say that's a "35 in drag". :)

Word on the street is that this is going to be a showcase car for the fabrication and tuning work that Willall can do - and their aim is over 500rwkw!

They are after everyone who buys an R35GTR to come to them for parts, tuning, service etc and will provide the highest level of technology and reliability to an already amazing platform.

ROFL Ash :)

I still have 2 valuations to type yet before I go to bed ;) .... what's your excuse for still being up? :)

yeah but its no longer in sydney

so first registered in sydney

first living in adelaide

as it was only in sydney for compliance it wasnt really living there :) if that makes sense :mad:

read the thread heading guys.......nothing about Adelaide being the 1st to have a 35 registered here.....it says Willall Racing Buys Australia's First Official Complied/street Registered R35gtr......doesn't say that it wasn't registered in NSW 1st
bah, just the easterners trying to claim it as their own ;)

Go easy guys. I was just clarifying what Jess has said (as quoted) not the entire thread.

:)

ROFL Ash :D

I still have 2 valuations to type yet before I go to bed :( .... what's your excuse for still being up? :D

Was work for me too, blasted test plans :happy: , there are few things more boring.

Would be cool to see it out at mallala.

Strap some full slicks on to the sucker. :happy:

We know were are the better state anyway............... :D

You can keep your morning air quality reports....

We have nothing of the like over here. :D:(:)

Wow, lots of emotion in this thread - about all sorts of things!

I look forward to seeing this thing in the flesh, I'm sure the pics don't do the metal justice.

I'll be interested to see how long Munro can hold off grabbing one!

I'll also be keen to see how the development of the car progresses, particularly with respect to the ECU tuning.

Properly tuned factory ECUs can produce some fantastic results without suffering the horrible compromises of many aftermarket solutions.

Hugely so. My mechanic has a really cute saying ... "Theres no substitute for cubic inches... unless its cubic feet..."

unless its a falcodore :) seems no matter how big they build that damn engine it still go's down

maybe if you bored ya rb26 out another 1.1L it might be closer :)

Edited by Inline 6
unless its a falcodore :) seems no matter how big they build that damn engine it still go's down

maybe if you bored ya rb26 out another 1.1L it might be closer :)

a rotary is an exception.

The Fg 310 seems to be pretty good car though.

a rotary is an exception.

The Fg 310 seems to be pretty good car though.

same rule applies with rotangs my boy.

throw some more cubes at it and watch the kw figures soar.

Looks amazing. The white is a great colour for it too, so classy and would set off the carbon fibre bits well.

Hope to see it cruising around soon enough.

Yeah, thanks Chops, you know it. I am holding myself back at the moment & will definately buy one. Just need to calm down a bit as I have already bought a few different cars this year & need to get my garages sorted out before I buy anymore. ie I need to free up some storage space & cant seem to decide what to let go. The R35 is F*%^in SICK & needs to be driven hard & modified to its full potential & I Want one as bad as the next guy, but all good things come to those who wait & it seems the the GTR legend is here to stay.

My 11 year old R33 is one of the craziest street cars in Adelaide ( anyone who has been in the hills with me will vouch for that) & my other R33 race GTR which will soon be ready for Mallala will be a dream come true for me as far as fun factor goes, so I just want to savour the "old generation" for a little bit more before delving into what is do doubt the best car money can buy under 200K.

Will watch with great anticipation to see how the "first" R35 goes. Keir told me today that they have already put a much better exhaust on it & it sounds like a "real" GTR now.

Remember, while "newer" is usually better in regards to technology, there can never be a replacement for the old school style,

& it will be a long time before an R35 can go flying past a properly sorted R34 or R33.

Hello new world of GTRs, & after years of drooling over photos on the net we can actually see & play with them.

Those of you who are reading this & are younger than me (that wont be hard - I was born when HQs were new!) wont really appreciate how far we have come - but believe it... We live in very exciting times. Soak it up. It may not last for long....

We live in very exciting times. Soak it up. It may not last for long....

Definitely.. I feel sad for my young lad. By the time he's old enough to drive a car the roar of a petrol motor may very well be a thing of the past.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 馃槢
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
  • Create New...