Jump to content
SAU Community

- Sweet And Simple R33 ! - Pics And Couple Youtube Clips...


Recommended Posts

Heya all,

Just thought i'd finally get off my bum and post some pics of my ride.

Plus i just bought a new digi camera ( Canon 10mp baby ! ) and just testing and playing around with it.

Had this car for around lil over 6 months now and bought it completely stock, Just tried to keep it sweet and simple. Steer away from the rice, and going with a JDM look ( low and tough ).

R33 95' GTS25t Type M

- Rb25det

- Apexi SAFC II ( tunes by DynoTunz )

- Apexi intake w/ home made heat shield

- Apexi N1 full zorst'

- HKS new design SSQV blow off valve

- Greddy front mount

- Turbosmart Tee @ 10psi

- Custom Catch Can

- JDM Concept reservoir socks !!! WOAH !

- Tein Coilovers ( on lowest setting )

- Cusco Strut brace

- Carbon Fibre gearknob / Autometer boost gauge / Apexi auto timer

- Rare Type M Grill ( well i dont see many around , ebay is the bomb ! )

- Potenza Re001 ( these are the shizzle ! )

- Top fuel sticker !!!! ( Adds 10kw @ the wheels for real ! ) :cool:

- Enkei RS evo II 16"( not on atm , no tread , Old school !!! )

- Dancing Drift Monkey FTW !!! ( solar power .. green peace dood ! ) :down:

Pics:

n52889572212727477015mg8.jpg

img0069rl8.jpg

img0071am9.jpg

img0070mi6.jpg

img0066iv1.jpg

img0097es3.jpg

img0102lc7.jpg

img0107yv8.jpg

img0106ge5.jpg

Youtube clips:

Just bought and install a new design HKS SSQV ( thanks to Steve ) ...

Just a quick strap, down a private road. No speeding on public roads people ! ( before HKS SSQV fitted )

Comments plezz...

Edited by lilhaulerz
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
    • C'mon! At least come kicking and screaming into the 2000s. BA XR8 bulge.
    • No such thing as E30 in Sydney servos As stated above, flex fuel is your only viable,  and "safe" option I believe
×
×
  • Create New...