Jump to content
SAU Community

Recommended Posts

Hey guys, new here as you can see

Picked up my 99 rs4 last sat, have always loved the stags and finally found the one i wanted.

Was excited to finally have h.i.d headlights, only to find out they've been ripped out and replaced with ordinary globes.

In one of the back storage compartments i found the ballasts and the original gas reduction globes, but from what i can tell it doesn't look like they even came out of this stagea. The fittings are completely different as to what would fit into the back of the headlights in it.. and the wiring colours are different.

I was thinking maybe to be complianced they've replaced the headlights with S1 units and just kept the 'xenon' covers on them?

has anyone still got the h.i.d lights in theirs and is able to post up a pic of the back of a light?

I don't know who would have done the wiring on the lights theyve been replaced with, but from an auto sparkies point of view its an abortion of a job. Bare wires hanging out all over the place. Thats why im keen to re wire the xenons in asap.

its been a week and one day, and so far ive had 4 different people call it a hearse :cool:

Link to comment
https://www.sau.com.au/forums/topic/236001-xenon-lights-anybody/
Share on other sites

they would have put an adapter plate inside the opening to convert them from D2R HIDs to H1 bulbs, just pry it out, probably siliconed in.

I did the rewire on mine, i had to buy a new plug harness and D2R bulbs (ebay). Easy enough to rewire, 3 wires from memory, +ve, -ve and a 'safety' wire which prevents power to the harness without the bulbs in place, if using an aftermarket harness i think this wire needs to be earthed ?? in order to overide the safety circuit. Best to pull out the whole headlight assemblies to see what you have left in place and a lot easier to do the re-wire. These are high voltage, so any joining should be done properly, with proper heatshrink etc, not insulating tape. The wires into your bulbs now should be the wires which were going into your ballast. Mine were cut so short i had to open up the ballast and re-solder new wires onto the circuit board (which is contained inside a block of insulating silicon). Pm me if you have any qu's.

Yeah havnt even checked the fog lights yet aye

ill get around to it

being an auto sparky i do this kinda thing all week at work.. and when it comes to my owns cars i kinda lack motivation. And on top of all the mates wanting jobs done on weekends lol.

2 mechanics and an auto sparky in the family, and all our cars sit around with mechanical and electrical faults :)

Few other things im yet to work out.. like the button on the left side of the wheel, shows both diffs, the 4 wheels and in the middle an 's'. I thought it was snow mode maybe, but there's a snow mode button in front of my centre console behind the gearstick. It's not shown in the manual.

just locks the 4wd into a 50:50 split...for snow as well, not recommend for use on hard surfaces due to the stress it puts through the transfer case, can come in handy ie. about the only time ive used it is on slippery boat ramps and backing the trailer up my steep lawn.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model. Congrats on your GTS purchase! I'd personally leave it NA.
    • In this thing about this 100% renewal energy stuff I hear no one really talking about anything other than power and fuel really Power and fuel, whilst being a huge part of how we use the billion year old Dinosaur juices, are only 2, of the probably thousands of things that we need to use it for in the chemicals industries for making nearly everything we use nowadays I'm all for a clean planet, but if we want to continue to have all the day to day appliances and stuff that we rely on everyday we will still need fossil fuels Whilst I do love science, and how it can bring innovation, there's really a limit to how far it can go in relation to "going green" As for EV's, unless your charging of your own solar panels, it isn't helping the environment when you consider the the batteries, the mining processes required,  the manufacturing process required, and how long a batteries (read: the vehicle) lasts long term If I was supreme dictator of the world, I would ban the use of sugar for fizzy drinks and food additives and use that for ethanol manufacturing, petrol engines would be happier, and people would be alot healthier  Disclaimer: Whiskey manufacturing would still be required, so says the supreme dictator of the world Same same for all the vegetable oils that get pumped into all our food, use that for bio diesel Disclaimer: the supreme dictator would still require olive oil to dip his bread in This would take some of heat off the use of the use of fossil fuels which are required for everything we use, unless you want to go back to pre 1800 for heat and power, or the early 1900's for plastics and every thing else that has come from cracking ethylene  Would I be a fair and just dictator, nope, and I would probably be assassinated within my first few months, but would my cunning plan work, maybe, for a while, maybe not Meh, in the end in an over opinionated mildly educated arsehole typing out my vomit on my mobile phone, which wouldn't be possible without fossil fuels And if your into conspiracies, we only need the fossil fuels to last until a meteor hits, or thermonuclear annihilation, that would definitely fix our need for fossil fuels for manufacturing and power issues for quite some time  Meh, time for this boomer to cook his lunch on his electric stove and then maybe go for a drive in my petrol car, for fun    
    • It really helps that light duty vehicles have absolutely appalling average efficiency due to poor average load. Like 25% average brake thermal efficiency when peak is somewhere around 38% these days. So even a 60% BTE stationary natural gas plant + transmission and charging losses still doing much better with an EV than conventional ICE. And that's before we get into renewables or "low carbon nonrenewable" nuclear which makes it a no-brainer, basically. In commercial aircraft or heavy duty diesel pulling some ridiculous amount of weight across a continent the numbers are much more difficult to make work. I honestly think in 5-10 years we will still be seeing something like the Achates opposed piston diesels in most semi trucks running on a blend of renewable/biodiesel. Applications where the energy density of diesel is just too critical to compromise. CARB is running trials of those engines right now to evaluate in real world drayage ops, probably because they're noticing that the numbers just don't work for electrification unless our plan is to make glorified electric trains with high voltage wires running along every major highway and only a token amount of battery to make it 30 miles or something like that after detaching. Transport emissions is not insignificant especially in the US, but yes there's a lot of industrial processes that also need to be decarbonized. I agree the scale of the problem is pretty insane but EDF managed to generate ~360 TWh from their nuclear reactors last year and this is with decades of underinvestment after the initial big push in the 70s and 80s. I don't think the frame of reference should be solar-limited. France is not exactly a big country either. Maybe it doesn't work everywhere, but it doesn't have to either. We just can't live off of fracking forever and expect things to be ok.
    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
×
×
  • Create New...