Jump to content
SAU Community

Trust I/c, R34 Gtr Fuel Pump, Door Release Kit, Ebc Pads, Braided Lines, Wiring Loom, Suspension Goodies And More!

Got Boost?
 Share

Recommended Posts

Got Boost? Experienced

Got Boost?

Posted
Posted (edited)

Items described below are all for sale, most are negotiable. I am willing to organise swaps or swaps with adjustments with any of the parts for the following -

Electronic Boost controller

Coils / Suspension to suit R34 GTR

BOVS / Hard Pipe kit to suit R34 GTR

Clutch to suit R34 GTR

Other performance parts of interest, PM me.

1. Trust V-SPL Intercooler Kit

Off my old R33, used for about 15000 KM's. Good condition apart from one small ding at bottom of cooler, has not crushed the entire row but has bent in fins above it slightly. Have been told this won't have a drastic effect on the coolers performance. Comes with all the piping etc to suit an aftermarket front facing plenum arrangement.

Chasing - $750

post-4555-1221447099_thumb.jpg post-4555-1221447108_thumb.jpg

2. R34 GTR Fuel Pump

Standard pump out of my GTR, perfect working order.

Chasing - $150 Posted

3. Full remote door popper kit (Brand New)

Bought a full kit for my R33 GTS-T to have the remote door pop thing happening. Comes with wiring guide, poppers, motors, remote controls and backup buttons etc. The poppers were upgraded to the stronger ones so they could easily handle coupe doors.

Paid - $350. Chasing - $250 Posted.

post-4555-1221447081_thumb.jpg

4. Front braided lines to suit R33 GTS-T (Brand New)

Bought for my R33 and never used, made professionally at brake shop.

Chasing - $125 Posted.

post-4555-1221447062_thumb.jpg

5. Noltec adjustable camber kit for R33

Brand new in the packet, also bought for my R33 and never used.

Chasing - $125 Posted.

post-4555-1221447044_thumb.jpg

6. Noltec sway bar link bush kit

Brand New.

Chasing - $20 Posted.

post-4555-1221447028_thumb.jpg

7. R33 GTS-T Bush kit

Brand New.

Chasing - $110 Posted.

post-4555-1221447008_thumb.jpg

7. EBC Green stuff Brake Pads (DB1170)

Brand new, bought and never used.

Chasing - $350 Posted (Full Set)

post-4555-1221446988_thumb.jpg

8. Cusco Strut Brace suit R33 GTS-T

Bought and never used, brand new in packet.

Chasing - $150 Posted

This Product is now $245 Delivered from Nengun - http://www.nengun.com/cusco/strut-brace-type-os

R33 GTS-T interior wiring loom! Complete!

Bought to redo my car, never used it! Fantastic condition!

Chasing - $170 Posted.

post-4555-1221446947_thumb.jpg post-4555-1221446955_thumb.jpg post-4555-1221446964_thumb.jpg

Racing Hart Type CX 19" w/75% Rubber.

Bought off a member here for my R33, they have been put on the car but the car never ended up going so technically never used since i bought them. They have some very light marks / scratches on them. Most can be polished out. Come with centre caps, very high quality wheel. Tyres are hankook, can take closer pics upon request. Specs are 235's on the front, 255's on the back and i have been told the rear can take wider tyres then those.

Chasing $2500 or swaps for 19" Rims / Tyres to suit GTR. Must be jap branded and am willing to supply cash adjustment.

post-4555-1221446846_thumb.jpg post-4555-1221446858_thumb.jpg post-4555-1221446869_thumb.jpg post-4555-1221446901_thumb.jpg

Edited by Got Boost?
Link to comment
Share on other sites
bloodsword27 Veteran

bloodsword27

Posted
Posted

hey mate have u got a pic showing how the IC pipe runs through the engine bay? do u still have the original crossover piping or did it get chopped n welded for the frontfacing plenum? very interested

...on second thoughts would u sell the core alone as well?

Link to comment
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
  • 4 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      rb20 r31 dies after revving (idles fine and no sputter)

      By niZmO_Man · Posted

      You've given zero info about your setup. Step 1: make sure all the standard equipment are working as they should. If they're not, go investigate why. Step 2: Make sure all your wiring is done properly. Know which RB20 you have, most likely "silvertop" a.k.a R32/A31 anything after 1989. Step 3: make sure your ECU is tuned properly. Standard will barely run in this situation.
    • niZmO_Man
      R35 GTR servo and master cylinder conversion

      By niZmO_Man · Posted

      Depending on your use case, prop valve will almost always be a better choice.
    • niZmO_Man
      Coilovers, what to choose?

      By niZmO_Man · Posted

      I think... in the US, Silvermax is the equivalent of BC Racing, i.e. cheap Taiwanese built suspension that gets turned for "local" conditions. Back in the day in Australia, you could get MCA street for about $1300 and they were awesome. Don't know about now... In saying that, my real world TEIN experience: I got some street basis z for my old Liberty (BR9), and they were awesome ($800-odd delivered from demon-tweeks in the UK). so Don't discount TEIN
    • niZmO_Man
      Gran Turismo 7 Time trial

      By niZmO_Man · Posted

      yeah my RedBull X2010 on Grand Valley is only good enough for bronze... I can't hit silver arrgh.
    • niZmO_Man
      AC Compressor

      By niZmO_Man · Posted

      100% this. Long ago, I had a guy from the R31 club who set my BNR32 up (adjustable arms all round). He did an awesome job, was an after-work kinda thing where I had to bring a slab of beer. My car never drove better, and I stupidly got a random tyre shop to check the toe angles when I changed tyres, and they ruined the alignment. tl:dr- it takes a lot of skill to set up your car lowered from factory properly, and is worth paying the $200+ it takes.
×
×
  • Create New...