Jump to content
SAU Community

Recommended Posts

u could try hallam tip, ready mix plant at the back, they got a weigh bridge as you drive in, dunno if its free though. theres also one on ordish road in dandy (off greens road). again, dont know if its free.

hm.. i work for the company that works at the tip, im in the clayton area working on the land fill's there,

for an easy access weigh bridge with parking would have to be Clayton Regional Public tip ... on the corner of Ryans road and Clayton road.

there is a speed hump in there but u can go around it, and there is one at the other end but just a small carpark one should be good,

Guys a bit of a prick there (brown nose) but im sure if your rock up with a decent amount of cars and get someone who is a smooth talker to bargin with him, say $5bucks each car into his pocket im sure he wont give a shit :)

  • 1 year later...

Hey East Melb guys, I found one. Didnt kno about it till last weekend, but on Burwood hwy right next to bunnings, theres a tip, and if you drive up and ask, you can get your car weighed there..its just across from

Morack road. got a friend who weighed a supra there at 1100kg, i got 1280 lol..

but yeh, just drive up. park and make sure u ask,,they do get busy

Hey East Melb guys, I found one. Didnt kno about it till last weekend, but on Burwood hwy right next to bunnings, theres a tip, and if you drive up and ask, you can get your car weighed there..its just across from

Morack road. got a friend who weighed a supra there at 1100kg, i got 1280 lol..

but yeh, just drive up. park and make sure u ask,,they do get busy

If a supra came in @ 1100kg's, then those scales are far from accurate :P

Just got back from a weigh bridge meet.

We went to one in Kilsyth, nice people there, let us negotiate to quickly run 15 cars on.. it only took 10 minutes to do.

I filled up a full tank just outside the weigh bridge so it would be easier to calculate.

Came in at 1600kg (weighbridge rounds to the nearest 20kg). So minus ~55kg for full tank, plus I have the boot stripped out, it seems about right when compared to the spec sheet (1560kg).

These are our results to the closest 20kg:

Daihatsu Sirion GTVi, 100% fuel - 900kg

Honda S2000, ~50% fuel - 1220kg

Honda Beat, ~25% fuel - 760kg

Nissan 350Z, 100% fuel - 1520kg

Nissan Pulsar Gti-R, ? fuel - 1260kg

Nissan Skyline R31, ~50% fuel - 1400kg

Nissan Skyline R34 GTR Vspec, 100% fuel - 1600kg

Nissan Skyline V35 350GT, ~50% fuel - 1560kg

Mazda MX5 soft top, ~50% fuel - 980kg

Mazda MX5 hard top, ~50% fuel - 1000kg

Mitsubishi Evo8 MR, ? fuel - 1440kg

Mazda RX7 FD3S, ~10% fuel - 1240kg

Suzuki Ignis, 100% fuel - 920kg

Toyota Celica ZR, 100% fuel - 1160kg

Toyota Soarer almost completely stripped of everything, ~30% fuel - 1420kg

Just got back from a weigh bridge meet.

We went to one in Kilsyth, nice people there, let us negotiate to quickly run 15 cars on.. it only took 10 minutes to do.

I filled up a full tank just outside the weigh bridge so it would be easier to calculate.

Came in at 1600kg (weighbridge rounds to the nearest 20kg). So minus ~55kg for full tank, plus I have the boot stripped out, it seems about right when compared to the spec sheet (1560kg).

These are our results to the closest 20kg:

Daihatsu Sirion GTVi, 100% fuel - 900kg

Honda S2000, ~50% fuel - 1220kg

Honda Beat, ~25% fuel - 760kg

Nissan 350Z, 100% fuel - 1520kg

Nissan Pulsar Gti-R, ? fuel - 1260kg

Nissan Skyline R31, ~50% fuel - 1400kg

Nissan Skyline R34 GTR Vspec, 100% fuel - 1600kg

Nissan Skyline V35 350GT, ~50% fuel - 1560kg

Mazda MX5 soft top, ~50% fuel - 980kg

Mazda MX5 hard top, ~50% fuel - 1000kg

Mitsubishi Evo8 MR, ? fuel - 1440kg

Mazda RX7 FD3S, ~10% fuel - 1240kg

Suzuki Ignis, 100% fuel - 920kg

Toyota Celica ZR, 100% fuel - 1160kg

Toyota Soarer almost completely stripped of everything, ~30% fuel - 1420kg

Interesting list I must admit there are a couple of figures I am surprised about. R31 I would have been sure was around 1300kg.

There are a few track soarers that are into the mid 1300kg range which are only interior and sound deading removed and light weight seats. Still with stock glass and panels, they don't weigh anywhere near as much as people make out. They certainly have the capability to be reduced to 1300kg as a dedicated track car.

There is a soarer track only build currently going on and the target is 1100kg. They have plastic windows fiberglass gaurds rear quarters bonnet and boot, I don't think they will make that but I cant wait to find out where they do end up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I did a bit of googling, the color MCM used was Galaxy Grey from House of Kolor. This is actually a colour I picked out about ~10+ years ago (or more). This one is a stock BMW colour, I guess over the years I figured it was smart to get an OEM colour that was pretty common for all of those sensible reasons one can think of..
    • I absolutely love having clean wheels and also totally love cleaning them. Its not as important to me to have a clean car exterior as it is to have clean wheels. So I bought a kit. I generally use different products for my wheels than anything else, so I thought I'd buy a proper kit and bucket to keep it all in. I got this one from Waxit. I also got the CQuartz wheel and plastic ceramic along with a bunch more application micro fibre pads as CQuartz never provide enough.  The kit was good, but as usual the big, long spongey thing didn't fit between my spokes, so I needed to use a detailing brush and a larger brush that I already owned (been doing this forever, the spokes on these wheels are frustrating.) I did a full clean with the wheel cleaner, it has an iron killing product in it, so I found that I could just use the cleaner and nothing else on the wheels. The tyre cleaner and handled brush were awesome. Made cleaning the tyres so easy. Once everything was clean, I decontaminated with isopropyl and applied the ceramic. Two coats. I bought 2 bottles as I have a lot of wheels to do, half of one bottle did two coats on these. The X5 has 20's so I reckon probably 3/4 on that. Then, for possibly the best part, the wheel cleaning kit comes with a tyre black applicator. But, this is possibly the greatest sponge of all time - its a great size, quite stiff and HAS A COVER! When you finish applying the black, you just put the cover back on! This is revolutionary, I normally have to try and find safe places to put my tyre black applicators as they are covered in silicone and tyre crap. Or, you use something which just falls apart. This applicator is the bee's knee's. Get one. It's worth it. The tyre black is also like a cream, its very thick but goes on really thin, its very easy to use with the applicator. Ayway, after a big clean, decontam, ceramic coat and tyre black the wheels went back on and they look awesome.   Thought I'd share. 
    • Haha. Good work. I feel some of your pain because I spent a bunch of time under my car over the period too. Probably nowhere near as much as you did. My happiness is similarly improved by obtaining a desired result though. Those side skirts are.....hecking. Very unfriendly for street and hoist. Sounds to me like you've made a cart that needs to be driven up only planks/blocks at a 2 post hoist, rather than trying to get it up onto a 4 poster. It's very pretty, by the way. Somewhat reminiscent of Marty's squid ink on SuperGramps - at least in the photos.
    • Absolute Legend 🍻 After fighting with the scanned ones for the last 10 years this is a God send 
    • ATTAKD 356mm Brake Kit for R34 GTT or R33 GTST. Same brake kit as per here from JJ: https://justjap.com/products/attkd-brake-kit-nissan-skyline-r34-99-02?currency=AUD Can confirm these will bolt directly to a R33 GTST with 12mm bolts OR to a R34 GTT (which is what I had) with the supplied bolts and the collets for the 14mm bolt holes in the R34, which are included. Also included is a set of rotors and hats, as well as 2x brake pad sets. 1) DBA XP (street, hills) 2) Forza FR6 (track) These are radial mounted and bolt directly to R33/R34. You will need extended brake lines to avoid them being full stretch on lock - this is common for all BBK's with the bolt point being in the center. In my case I welded another stud about 25mm lower than the OEM one and retained stock lines and fittings. You'll want a BM57 BMC to get the most out of these. I speak from experience. $1800 (neg for SAU people), located SE Suburbs Melbourne.
×
×
  • Create New...