Jump to content
SAU Community

Recommended Posts

Don't know how true it is (haven't done it myself) but my mechanic told me he'd have to remove the whole front bar to change the parkers!!!.....I know for a fact that the headlight globes are accessable from the back of the headlight...you'd think they'd make 'em all like that!!!

Anyway let us know how you get on......

Good work lads - can't wait to cut my hand in several places trying to get the suckers out!

Can you get those 'white' phillips lights from anywhere normal. It would be nice to change those stock parker bulbs they look almost orange !!!!

I was thinking about new headlights as well - add a little more white to them ;) Any tips about where from and how much to spend?

  • 4 years later...

now i agree that the parkers should be able to change without taking the headlights out...

BUT i cant seem to do it. ive changed my normal beams but the parker just seems to have a plug going to it. cant see anything that is able to unscrew or take out. I have a series 2, is there any difference??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If shift solenoid A is bad, that explains limp mode --- now you're in the same position as I mentioned previously, in that the next step is to confirm loom/wiring integrity from TCU to gearbox connector with a multimeter (the TCU cannot detect a broken wire, which can happen ..ie; rodent damage, loom rubbed through)...and then finally measure resistance (at the gearbox connector) for shift solenoid A ... ...once you confirm shift solenoid A is bad (open circuit, really low or greater than 40ohm resistance), then it's a job ; you have buy a complete solenoid set, get under the car and drop transmission oil pan, and remove valvebody assembly (the solenoids sit on top), replace solenoid set, and reassemble....it's not exactly a fun task, but readily doable.
    • Is it oil smoke or fuel smoke? They smell different.
    • I only use rubber also. I have an intense distrust of silicone for coolant.
    • Clamp meter will probably tell you lies. PWM DC looks a bit like AC (because the voltage is going up and down rapidly), but it is not AC because the voltage never goes negative and the current never reverses direction. But because it looks like AC, and it is happening at high frequency, at can cause wierd reactive effects. Just be warned that you might learn things that are....confusing. Because they aren't necessarily real.
    • Appreciate the detailed response! It's all new technology to me and your suggestion for reducing DC and finding sweet spots seems like a great approach.   I'll chuck a clamp meter on it at the same time and figure out whats happening at different settings to get a good understanding.   Will report back with my findings when I get around to it to help anyone in the future that will be in the same situation as me 😁
×
×
  • Create New...