Jump to content
SAU Community

Recommended Posts

Hey guys :(

Just looking for some eyelids for my R34, ive had a little look around and couln't find to much only a few sets of ebay. Just wondering if any-1 could point in the right direction or even a sponsor that might sell them ? and what is need to install just a tube of sikaflex ( how ever it's spelts :D )

Link to comment
https://www.sau.com.au/forums/topic/236298-r34-eyelids/
Share on other sites

i made my own custom eyelids out of pinstriping tape

i have a white 33 and taped them up so they look like s14 style

not bad for 8 bux, and the color matchs up pretty well with most paintjobs

plus u can make em look however u want

always gettin other lines pullin up askin where i got mine from

giv it a go, u can always peel it off

Link to comment
https://www.sau.com.au/forums/topic/236298-r34-eyelids/#findComment-4139072
Share on other sites

i got my uras ones off ebay, from status tuning i think.

they the same as nomura ken uses but i recon u need a

more agressive front bumper not the nicest with a stocky

i would be looking at getting a full bomex kit hopefully with in a month or so aswell that wont be a problem :)

can any-1 recomend a good place to buy kits of, found a few but with very poor customer satafaction :)

Link to comment
https://www.sau.com.au/forums/topic/236298-r34-eyelids/#findComment-4139160
Share on other sites

i would be looking at getting a full bomex kit hopefully with in a month or so aswell that wont be a problem :(

can any-1 recomend a good place to buy kits of, found a few but with very poor customer satafaction ;)

I got a Bomex Kit and C-West Eyelids ready for my 34...havn't fitted them yet because im waiting for my wide ass rear panels and front gaurds.

I got my eyelids from Carmate though like a couple of people have already mentioned, they come unpainted and probs need a decent sanding before you fit them and paint them.

Goin a lil off track (sorry), I thought the bomex kit would be awesome but if you havn't already bought it you might want to reconsider to another kit, they are quite over the top 'ricerish'....if i had an option i might actually have gone with Impul or something a bit more suttle. Anyhow its up to you i guess, just telling you from my own exp. I'd say the URAS eyelids would suite the Bomex kit better than the C-West ones. (Also Carmate is in NSW and has a site you can purchase and get the parts you need shipped to Tassy). Everything can be done online and they are quite reliable form own experiences buying stuff from them.

Link to comment
https://www.sau.com.au/forums/topic/236298-r34-eyelids/#findComment-4142275
Share on other sites

I got a Bomex Kit and C-West Eyelids ready for my 34...havn't fitted them yet because im waiting for my wide ass rear panels and front gaurds.

I got my eyelids from Carmate though like a couple of people have already mentioned, they come unpainted and probs need a decent sanding before you fit them and paint them.

Goin a lil off track (sorry), I thought the bomex kit would be awesome but if you havn't already bought it you might want to reconsider to another kit, they are quite over the top 'ricerish'....if i had an option i might actually have gone with Impul or something a bit more suttle. Anyhow its up to you i guess, just telling you from my own exp. I'd say the URAS eyelids would suite the Bomex kit better than the C-West ones. (Also Carmate is in NSW and has a site you can purchase and get the parts you need shipped to Tassy). Everything can be done online and they are quite reliable form own experiences buying stuff from them.

cheers mate that was a great help ;) havn't bought anything as yet still on the *prowl* :(

Link to comment
https://www.sau.com.au/forums/topic/236298-r34-eyelids/#findComment-4142321
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dunno what to tell you, when I look at it on Consult I can see this warmup timing map kicking in around 40C coolant temp and it sticks around for a while:  At part throttle on the normal base timing map it peaks around ~43 degrees of timing or something like that, this warmup timing map drops it to like 12-15 degrees. 
    • I don't think that's what you're seeing. Something else doing that. The only time I've seen it get so retarded is when it's trying to control idle (in which case we're not talking about mapped timing tagets anyway) and when there is an extreme coolant temperature sensor fault. The RB26 ECU is essentially the same as the 20 ECU and I knew that ging inside out. There is no facility for it to retard that heavily on cold start. The OEMs never used to do it back then. I mean, shit, the catalyst is abotu 3 miles down the exhaust anyway. Early light-off was just a twinkle in some EPA arsehole's eye back then, not a regular engine control strategy.
    • I must preface my comments with a general expression of ignorance. I have no specific knowledge of these NA automtaic things. I can only assume that the "steering wheel button" is for enabling the tiptronic controls. Wierd that it would even need/want a button for that... But anyway.... Was the car previously tiptronic? Did you put a new cluster in as part of all this?
    • Regardless, it doesn't seem wise especially on RBs to actually chase MBT. Timing scatter is the big one on stock CAS, even if that's fixed overshoot is worse than undershoot. 
    • It's all about reducing the overall output. Reduce the source of it, you have wayyyy less to deal with in every other step and trick you play with. It's why something like a modern vehicle, so VW, Audi etc, there's thousands of tables for the ECU to calculate what it should be doing with the engine.   Why would you NOT reduce emissions the most effective way possible, when it has very minimal tradeoff, AND manufacturers are always struggling to meet the current standards.
×
×
  • Create New...