Jump to content
SAU Community

Recommended Posts

Hiya,

I'm due for new rears, now I've used T1R's on my old stock rims and can vouch that the grip was awesome for both wet and dry. I'm considering using RE001's on my new but I am unsure if I'd be taking a step back.

Curious to see If anyone has had the chance to use both of these tyres yet or just the Adrenalins.

The tyre thread had some but not many users of the adrenalins. Those who did said they were good, but there were more people who used the T1R's and said they were great.

I know wet weather grip for T1R's is great, Is it also very good for the RE001's?

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Hey mate, have Re001's on the car at the moment and i'd swear by these tyres. Haven't tried the toyo's nor been in a car with them on, but i am really happy with the performance of the Adrenalins and would definelty get them again.

I'd like to compare them back to back, but I can't afford to do that. I've priced the T1R's and RE001's and both are $330 for 255/40/R17.

I had T1R's on the stock rims in 205/55/R16 so I won't really be able to do a proper comparison if I get the RE001's on my new rims. I currently have RE01's but are on their last few 100kms of life left till they're illegal, and they seem to stick pretty good.

SLEEPR85 how's your wet weather grip? Try T1R's out next time and see how you like them ...I dare ya :P They are a great tyre.

I'm just keen to try something different to what I've used but not sacrifice grip from what I know is good.

your comparing different sorts of tyres, the R1-R is nearly a semicomp, where as the RE001 is a street tyre and isn't any where near as soft, it's only a replacement for the rest of the old RE040's and the likes. If your looking for grip i'd be going the toyos for sure

your comparing different sorts of tyres, the R1-R is nearly a semicomp, where as the RE001 is a street tyre and isn't any where near as soft, it's only a replacement for the rest of the old RE040's and the likes. If your looking for grip i'd be going the toyos for sure

Your only saying that cause you are crap. :bunny::)

Id go the Toyo in this instance from what i have seen and read.

Ross

your comparing different sorts of tyres, the R1-R is nearly a semicomp, where as the RE001 is a street tyre and isn't any where near as soft, it's only a replacement for the rest of the old RE040's and the likes. If your looking for grip i'd be going the toyos for sure

this thread is about T1R's, not R1R's!

your comparing different sorts of tyres, the R1-R is nearly a semicomp, where as the RE001 is a street tyre and isn't any where near as soft, it's only a replacement for the rest of the old RE040's and the likes. If your looking for grip i'd be going the toyos for sure

Uhh....yeah dude, I'm talkinn about T1R's not R1R's. Thanks for the input anyway

Your only saying that cause you are crap. :P:D

Id go the Toyo in this instance from what i have seen and read.

Ross

Yeah, that's what I'm trying to get at. Not many seem to have tried the RE001's on here, but those who have say they are good. Just like the people who have used the T1R's say they are good, but there seems to be more who have used the T1R's and not the RE001's

I have RE001's on my front and i'm very happy with them.

Don't know much about the toyo's though so i can't compare.

Would you get them on the back when they're due?

Good to hear you're happy with them on the front anyway.

I've ordered the RE001's today. So probably next week i'll get them on or so. I'm expecting to be impressed with all the RE001 hype and advertising money they've spent for these tyres. So the theoretically should be just as good or better than T1R's. If not, I'll go back to Toyo's.

Any more comments is still appreciated, cheers for the reply's people

I herd disapointing reviews of the RE01's from the racers at superlap on the GTR's. The times confirm the poor performance. The Falkins were much better. I had just purchased R1R's from the first Australian batch and they are simply amazing.

I highly recomend you try and get a set of them.

I've already ordered the RE001's, bit late to back out now.

I hope you're not confusing the RE-01R's with the RE001's. I currently have RE-01R's on the car and from my understanding have superior grip to the RE001's. So i'm taking a step back so to speak. I should have priced the RE-01R's again but i didn't, but I'd expect them to cost more again. Which I'm spewing about cos i didn't realise this till later today that i'm actually downgrading from what I've got.

So lets say for instance the tyres in direct competition to each other should be the R1R's vs RE-01R, and the T1R vs RE001.....yes?

I've already ordered the RE001's, bit late to back out now.

I hope you're not confusing the RE-01R's with the RE001's. I currently have RE-01R's on the car and from my understanding have superior grip to the RE001's. So i'm taking a step back so to speak. I should have priced the RE-01R's again but i didn't, but I'd expect them to cost more again. Which I'm spewing about cos i didn't realise this till later today that i'm actually downgrading from what I've got.

So lets say for instance the tyres in direct competition to each other should be the R1R's vs RE-01R, and the T1R vs RE001.....yes?

Yeah sorry I got confused. I thought you were talking about the RE-01R. Which is ment to be Bridgeies best street tyre but really isnt anything too special. But you were talking about the RE001 which I know nothing about.

I must say, I gave these RE-01R's a test on the twisties today because I haven't really done so beforehand. Maaaaaaan they stick like glue to the road.

Since the rear RE-01R's are on the indicators now I'll have RE001's on the back when they get fitted and RE-01R's on the front.

I'm hoping they'll grip nicely for a street tyre like others have experienced. Overall I'm impressed with the tyres I've got now.

Thanks for the replies, looks like they should turn out to be a nice tyre, but like I said before, I'm still a bit spewin that they won't be as good as what I've got now.... At the same time though I'm sure they'll be quite adequate for what I use the car for.

Edited by KeyMaker

Keep us updated with your thoughts as they wear in.

I bought a set of brand new Bridgestone Adrenalin RE001s for my R33 GT-R in 255/45 ZR17. That's one at each corner on standard R33 GT-R wheels, with TEIN coilovers.

That was a good few months ago. These tyres replaced Dunlop Direzzas which were on the wheels prior (which were basically bald). Clearly I lost a fair bit of outright grip going to the Adrenalins and certainly a lot of steering response (with the Direzzas nearly bald, steering was on the verge of darty, particularly over bumps and ridges when the car would tramline terribly).

So at first the Adrenalins made me think they were a bit soft and squidgy, despite running around 37-38 psi cold pressure as I usually do. After a little bit of 'spirited driving' here and there I think they've worn in nicely now (either that or the psychological 'novelty' of the tyres has worn off and I've adapted my driving style) and they seem pretty well keyed into the road. In the wet they also seem competent. I have probably driven the car about 6-7 tenths since getting these tyres in the dry, and maybe only 3/10ths in the wet (haven't driven the car much lately) but in those conditions I'm quite happy with them.

I'll soon be getting some 18"x 10" GT-Cs delivered, which I'll need new rubber for, and I'd be happy to go Adrenalin's on those too, but I'll be reading up some more on these and other forums to see what alternatives out there.

Matt

I just had these fitted on today. I did 1st and 2nd gear run and they gripped nicely without breaking any traction. It had the slightest sound of skittle on the 1st to 2nd gear change. I let the clutch off slow then planted it and it stuck all the way.

I'll post back later i've got to go do something....

So they seem to be gripping nicely at the moment, but I'll have to wait till they're run in so I'll give ya's all an update in due time.

One thing I noticed with the T1R's when I first bought them is how squishy they felt, after a couple of weeks of driving on them the squishy feeling disappeared and they felt good. These don't really feel squishy but I get the feeling of softness going from the RE-O1R's to the RE001's. So I'll see how they are in time.

One other thing, I took a corner at a pace today, it was a 90 degree bend and i got understeer.... strange. Maybe I turned to harshly, I just figured it would point and go like before, but not quite. Maybe my front's dont stick as well as the new rears.

Earlier this week I discovered that my RE-01R's suck in the wet. I pulled out onto the road just after I rolled through a puddle in the driveway at work and the road was still moderately wet. Drove out in first and only mildy hit boost and the rears lost traction which pointed me in the direction i wanted to go in quite quickly. It was fun though haha. So I get the feeling that when I do drive in the wet, my fronts are going to have considerably less traction than the rear, which should cause me understeer.

I have Adrenalins on my car now.

255/40/17 rear

235/45/17 front

250rwkw, they are better in grip than the 3000A's i had when they were new (XR6 tyre, old gen). And i must admit the 3000A's were amazing considering in 16's they cost me $150ea new in what, '03 :cool:

The RE001's hold perfectly almost everytime in the dry with full throttle. Wet is surprisingly decent as well, can still get a fair amount of power down before its arguing. I haven't dont any big launches yet to see how they perform off the mark, however rolling starts from 20km/h and WOT are no problem.

Been on several hard twisty runs now also, although im not pushing them as hard as i could as my brakes aren't upto the task yet (warped rotors i need to fix)

So in saying that... They respond really well for a dedicated street tyre... cant ask for much more than that considering the price i paid.

FYI - im also running extra camber and nothing stock suspension wise and so on also which aids for the hill runs and i dont really notice much understeer. So overall very very happy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • There are certain tasks, like replacing head gaskets, where it is very much best to already know what you are doing, and if you are not already an expert, then the next best thing is to have an expert around to help it get done. Little annoying checks and steps that are easy to forget or not interpret the results of properly, etc etc. It is hard to convey that to someone as a lesson prior to taking on a job, because there can be a whole list of "if you see this then it means that", or "if this is what you find then you will need to do these other 4 steps first". All the little bits of knowledge around sealant choice (ie, sealant at all? or no sealant? sealant only in certain parts of the gasket? sealant for this type of gasket but not that type of gasket? etc etc) cleanliness checks and methods, surface straightness and finish checks and methods, etc etc, all combine to mean that people who have done many of the same type of job will struggle less to get a good result than someone who hasn't done it before. I've been around this stuff since forever. But I will still consult with my expert(s) before taking on the big stuff with higher risk profile.
    • Well if I end up having to do the head gasket I will certainly find the necessary tools and instructions before beginning... Let's hope it won't come around.   Definitely. Depends on the job but I think "if you want it done right, do it yourself" applies almost every time
    • Can you at least move to a location without so many ladders, black cats and mirrors precariously propped up ready to be knocked down? Or buy yourself a 1 ton bulker bag of salt to drag around with you. Just, you know, sling it over your shoulder?
    • Meh, what's the worst that can happen? If is is supposed to have a washer, and: the spring retainer seals reasonably well on the surface, maybe just allowing a little bleed of oil out, and the spring does not coil bind when compressed that little extra bit, then the end result will be slightly higher relief pressure setpoint, and no other noticeable effects.
    • Weirdly I see a flat washer on aftermarket pumps but as you said it doesn't seem like new OEM pumps have it. EPC doesn't break out the regulator as a separate component either. I'm guessing if the pump came that way it's safe to use as-is. 
×
×
  • Create New...