1992 R32 Gts Brake Pad Help Needed :(

[sidewazegtst]

Hey everyone what's up.

Ok here is my situation. I have a 92 Nissan R32 GTS (non turbo) and I have to change my brake pads. Looking at the calipers they looked just like my old 240sx with a large single piston up front, small single piston rear. So I figured I could use those pads rather then having to source OE stuff from Japan. Well the rears FOR SURE don't fit. Seems the 240sx rear brake pads are to small to fit in the caliper with approx 1 cm difference length wise. I haven't checked the fronts yet though but before I do I was hoping someone here who could confirm what pads I need and maybe what North American Nissan car I could use.

Since I don't have the 4 piston front calipers I know 300zx front pads won't fit, again I am thinking the 89-96 240sx front pads will work. Am I right?

With the rears, would pads from a 300zx non turbo fit?

I've tried searching this forum and even my local GTR Canada forum with no luck. It's all GTS-t stuff I come across which doesn't help me .

Well hope someone here could shed some light on this and help a brotha out, hehe .

I appreciate it and thanks very much.

Cheers

[blind_elk]

Check here:

http://www.bendix.com.au/ProductCatalogue....;FromHomePage=1

Might be a starting point to find a North American Nissan that uses the same pad.