Jump to content
SAU Community

What Am I Looking For?

Sammy34

By Sammy34,
in Queensland

 Share

Recommended Posts

Sammy34 Community Regular

Sammy34

Posted
Posted

Hey hey, I'm current in search of a R34 and just want some advice on what I should be looking for in relation to how well the car im buying has been treated. What are the calling signs of these cars being miss treated besides the obvious eg: swelling in the radiator from over heating etc. I'm also needing to purchase the a Tiptronic model (Parter can only drive Auto's :thumbsup: ) how strong are there gear boxes and are there any generic problems with the sequential gears boxes i should know about before purchasing.

Cheers ~Sammy~

Link to comment
https://www.sau.com.au/forums/topic/237203-what-am-i-looking-for/
Share on other sites
666DAN Grand Master

666DAN

Posted
Posted

The tiptronics are great, they don't like being worked until the gearbox has been warmed sufficiently though and will just flare...I'm not sure if this was more of a protection feature as even new R34's I drove 'back in the day' did this.

Generic issues with the box are the shift solenoids breaking, it's crops up here and there...more likely though is the coil packs *will* die, try and get a car that has splifires already installed, or at least factor this into your purchase.

It's handy to run the ECU diagnostic as well, just to check any warning codes stored over time. You may get the odd minor one lie "O2 Sensor" or something more on the major side of "Ignition coils" "Shift solenoid" "overheated"

Shame you weren't looking around the start of the year, my car was for sale then (realistically still is haha)....not sure if I'm too attached to it now after the awesome changes it's had :thumbsup:

have a looksi - http://www.skylinesaustralia.com/forums/66...html&hl=r34

Sammy34 Community Regular

Sammy34

Posted
  • Author
Posted

Cheers, well i went exploring today and found what I believe to be exactly what im looking for.

Black R34 1999 model, 76,000 k's on the lock, turbo tiptronic etc... extremely good condition for 17,500. Just need to get the cash out but will have a few more good looks over the net this week to make sure. Now just need to go looking for mods I guess, my dad previously owned a 34 manual a year or two ago, anyone who lives in brisbane may have seen it around (HAR34 white with C-west kit) so I got a fare idea what im going for mod wise but any suggestions on smart mods to get done would be a big help. Plus still got an AVC-R sitting in the garage from my dads old 34.

Sammy34 Community Regular

Sammy34

Posted
  • Author
Posted
Get the following

Splitfires

Turbo back exhaust

FMIC

ECU

Fuel pump

Injectors

AFM

Fuel reg

...some sort of HKS turbo, GTRS is great for the RB25

Ah great, thanks. What sorta prices am I looking at for the lot? I've got about 8g in the bank a bit more to play with if need be but id prefer not to dig into that. Prefer to spend as little as possibel including intall without a dodgey job being done.

666DAN Grand Master

666DAN

Posted
Posted

Splitfires -$500

Turbo back exhaust ~$1000

FMIC ~$500 for a kit

ECU ~ $1800 (Max price installed & tuned) ROM is the best for auto R34's

Fuel pump ~ $200

Injectors ~$600

AFM ~$250 Z32 + plug (CRD sell them)

Fuel reg ~$150

...some sort of HKS turbo, GTRS is great for the RB25 ~$2700 (Brand new kit with everything in it...check out prices delivered from the US also GT2535 is great for ~250rwkw and a bit cheaper)

~$7700 (I'd say 100% on the underside of that if you shop around)

Everything there you could fit yourself over a weekend with minimal dramas, I'd advise a proper HKS turbo kit as it has everything you need, no messing around bolt-on...the ECU price is on the top-end as well, just to cover all costs, someone posted about a place that does install and tunes of R34 roms over in the bayside.

Sammy34 Community Regular

Sammy34

Posted
  • Author
Posted (edited)
Splitfires -$500

Turbo back exhaust ~$1000

FMIC ~$500 for a kit

ECU ~ $1800 (Max price installed & tuned) ROM is the best for auto R34's

Fuel pump ~ $200

Injectors ~$600

AFM ~$250 Z32 + plug (CRD sell them)

Fuel reg ~$150

...some sort of HKS turbo, GTRS is great for the RB25 ~$2700 (Brand new kit with everything in it...check out prices delivered from the US also GT2535 is great for ~250rwkw and a bit cheaper)

~$7700 (I'd say 100% on the underside of that if you shop around)

Everything there you could fit yourself over a weekend with minimal dramas, I'd advise a proper HKS turbo kit as it has everything you need, no messing around bolt-on...the ECU price is on the top-end as well, just to cover all costs, someone posted about a place that does install and tunes of R34 roms over in the bayside.

Cheers mate, big help. Just a question that will probably seem dumb but, can do it yourself over a weekend? Would ahve thought the car would require a good tune with some of these mods or are they just simple bolt on and go mods? And are there any mods there that would require the ECU to be changed, would just prefer to steer clear of the ECU and Turbo for the moment, the rest I will do all in one hit.

Edited by Sammy34
Redsuns88 Veteran

Redsuns88

Posted
Posted

Depends if your technical minded or not..can always read the how-too section but thats boring! asking direction questions is the way to go! :)

also depends what tools you got.. if u wanna do stuff at home, try the front mount intercooler first see how your liking to getting your hands dirty, or splitfires..

Injectors, AFM, Ecu+tuning and zorst.. should be done at a proper workshop.. incase ur not too confident with the whole things...l

Sammy34 Community Regular

Sammy34

Posted
  • Author
Posted

So goin to test drive a 34 tomorow.

*HKS SSQV

*HYBRID front mount intercooler

*APEXI power Intake air filter

*APEXI AVCR

*HKS turbo Timer

*Kakimoto 3 inch exhaust

* 3 inch Hi Flow Cat

* Stainless 3 inch Dump Pipe

* Stainless 3 inch front pipe

* Splitfires

Any general estimate on what sort of power the car will be running?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Turn signal wiring question

      By Dose Pipe Sutututu · Posted

      Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...