Jump to content
SAU Community

Recommended Posts

This is something that is not often made very clear even in the specs:

For a NON-VSPEC R33 GT-R, do they still have an Active-LSD?

(different Attesa computer, I know, but still an active one?)

As in, power can be transfered from one side of the rear wheel to the other electronically?

Also, do the FRONTS have an LSD? Active or mechanical?

Anyone know for sure?

Link to comment
https://www.sau.com.au/forums/topic/23727-gt-r-attesa-lsd-question/
Share on other sites

The R33 GT-R (non-V-spec) has a couple of "wet" multi-plate LSD`s front and rear with the ATTESA-ETS.

The R33 V-spec (and N1:))adds an active LSD on the rear, with the ATTESA-ETS Pro system.

**I`m reading this from Japanese, and they say it`s a "Shisshikitaban" clutch LSD... shisshikitaban literally means "wet-process multi-plate/surface". I have no idea what the usual English automotive term is, sorry.

Originally posted by acediac

the R32 workshop manual and the front diff seems to be an open diff... maybe it's different on the R33?

Thanks!

The R32/33/34 Bible I`m reading from doesn`t specify if the multi-plate LSD`s are on the front or not, it just says "Shisshikitaban LSD" under the diff section... after seeing some Nismo front LSD internals available, I just assumed they were LSD on the front from factory.

Evidently not. After more research, and as far as I can tell, the ATESSA E-TS is is the same for the R32 and 33, with an open front diff and multi-plate rear LSD (V-Specs have the Active LSD on the rear).

Sorry for the confusion:)

Originally posted by Rezz

The R32/33/34 Bible I`m reading from doesn`t specify if the multi-plate LSD`s are on the front or not, it just says "Shisshikitaban LSD" under the diff section... after seeing some Nismo front LSD internals available, I just assumed they were LSD on the front from factory.

Evidently not. After more research, and as far as I can tell, the ATESSA E-TS is is the same for the R32 and 33, with an open front diff and multi-plate rear LSD (V-Specs have the Active LSD on the rear).

Sorry for the confusion:)

Ya my car certainly doesn't behave like it has a front LSD. I've seen a GT-R Japanese magazine that talks about Cusco LSDs for front and rear though.. I wonder if I can just buy an LSD for the front. I wonder if the front transfercase/driveshaft will handle a front LSD load though... obviously it wasnt designed to...

When I get my scanner I should scan that page for you to interpret, Rezz :D

BTW which GT-R bible are you reading?

Cheers!

Originally posted by acediac

BTW which GT-R bible are you reading?

Re: Re: Re: How diffrent is VSPEC and VSPEC 2  

(Quote:)  

It's a Hyper Rev/Nissan/JAF silver special edition... my most prized automotive book, it chronicles the timeline from BNR32 to 34 with every concievable model variation and detail... in Japanese!

It`s called "1989-2002 Skyline GT-R Memorial"... as per the explanation above.

Originally posted by acediac

I think I seriously need to start learning Japanese... :D

Set aside 5 years for that, and 3 of them in Japan!

Seriously though, learning Katakana and Hiragana Japanese script would help out immensly when browsing internet sites and magazines in Jap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • Thanks buddy. I thought it was a server storage thing. 馃ぃ
    • Perfect! Thanks for this, both look like great options!
  • Create New...