Jump to content
SAU Community

32 Skyline Aircon Question?

greenzook89

By greenzook89,
in General Maintenance

 Share

Recommended Posts

greenzook89 Enthusiast

greenzook89

Posted
Posted

hey i just bought a r32 and when i bought it neither the aircon or heater worked, my aircon guy came out and said its an electrical. so i started to pull out the dash and got the heater to work, all i did was jiggle the wires near the aircon controls, but now the heater wont switch off. what do i look for?? also the aircon only switches onn intermitantly, what could this be?? thanks for your help guys

Link to comment
https://www.sau.com.au/forums/topic/237417-32-skyline-aircon-question/
Share on other sites
Bart Japan Collaborator

Bart Japan

Posted
Posted

When I bought Mine the Heater ran all the time on hot. No AC when I dismantled the DIN I found that someone had forgotten to connect the internal air sensor so It thought that it was -33 deg inside the car and was trying to heat it up... so if that is connected bottom right near the ash tray.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      Short shifter r34

      By drifter17a · Posted

      Way more than 1cm. Appreciate the advice maybe I try changing the bushing first
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Kinkstaah
      R34 Diff oil

      By Kinkstaah · Posted

      Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • GTSBoy
      Short shifter r34

      By GTSBoy · Posted

      Let's just fix the problem by f**king the rest of the gearbox.
    • GTSBoy
      R34 Diff oil

      By GTSBoy · Posted

      Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
×
×
  • Create New...