Jump to content
SAU Community

The Quickest R34


inertia1
 Share

Recommended Posts

I have R34GT-T Coupe manual, I'll list my mods:

Hybrid FMI, 660cc injectors, OsGenkin Twinplate clutch, Forged pistons 40thou,

billet rods, 3in turbo back exhust, niztune chip, Fuelpump 245L/Minute,

Turbonetics T3/T4 turbo, rolled off 400rwhp, kerb weight 1520kg with me in it...

Well aware the turbo is holdin me bak, starts spoolin @ 2,000 full boost @ 3,500 (17PSI)

I'm expectin mid to high 11's am I foolin myself?

Also could u list ur times n mods for others?

Cheers Trav

post-33123-1222253965_thumb.jpg

Link to comment
Share on other sites

  • 2 weeks later...

I meant like registered aussyland car, i'd love to hear 9 or 10 second car and what has been done to it...

fastest unsponsered R34 street car, i just want to see how far the bar is? TJ

Link to comment
Share on other sites

I meant like registered aussyland car, i'd love to hear 9 or 10 second car and what has been done to it...

fastest unsponsered R34 street car, i just want to see how far the bar is? TJ

Your criteria has got more refined every post. A privately owned full weight (+ cage) street R34 GTR did a 9.7 1/4 mile in NZ on its only run not long ago but that again was in NZ and went to the UK. Things like that aren't rare though, I'm sure there would be more like that around. I have been getting the impression that RH9 in Oz could be able to but is more of a dyno queen?

To be fair, if you want to own a fastest anything that anyone is going to pay attention to you should aim at running 9s. I have heard of a few Oz R34s that would be able to do 10s if they bothered, and may have.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
    • NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
×
×
  • Create New...