Hid Xenon Kits & Led Parkers - Group Buy #9 - Open

[Angry]

Hi Guys,

"I am a long time listen first time caller"

HID kits. As the title says Group Buy. For the SAU members out there.

This is the 9th Group buy so far that i have run with HIDs.... my first with the SAU club.

I have successfully sold over 80kits since april this year to skyline owners and the like around Australia.

Price list is posted below further down in this post.

However, my prices are my prices, im not holding anyone at gun point participate in this group buy with me.

I like to keep things straight forward as possible, if you dont like, dont buy, dont post.

Please Bare with me as im not accustom to later model nissan headlights just yet.

I believe R33/R34 take H1 R32 GTR take H3. Non projectors take H4 hi/lo. anything else nissan i would like your help. would be greatly appreciated.

Thanks for your time. Happy Reading. Look forward to a successful group buy.

I have on offer at this price Conversion Kits to suit H1/H3/H4/H7/H11/HB3/HB4/9004/9005/9006/9007

Now also on offer - Hi/ Low Conversion kits for H4/9004/9007/H13. Available in Xenon & Halogen, Dual Beam Soleniod and Xenon & Xenon.

Please PM me for prices and more information on Dual Beam and Xenon & Xenon (Bi- Xenon)

There is no cutting or modifying involved with fitting these kits you can revert back to standard at any time, as needed.

Available In all temps from 4300k, 5000k, 6000k, 8000k, 10000k and 12000k , However 3000k and 15000k are a 10dollars dearer.

Also Now Available 30000k which is Purple for extra 25dollars.

Kits are designed for Low Beam replacement. I have rarely use high beams since in any of the cars iv'e fitted them to.

I recommend 4300k, 5000k or 6000k, The common misconception is that the higher the Kelvin rating the brighter, which isn't true. its completely inverse to that.

I believe these are far better than the other Chinese made & cheaper kits appearing on Ebay at the moment.

However I will not let this thread turn into a slanging match in regards to this. I stand by my products.

I will do my best to replace parts under warranty just the shipping to and forth can take up considerable time if there is any failure to the parts.

So far NOT one kit has had any issues with any part included in the kit, whatsoever.

Pictures Tell a thousand words.

Packaging and Some of the Labelling is slightly different to as above currently. Parts are no different.

Now Also Available Are Slim Line Kits.

Smaller "Slimline" Ballast Packs. @ $ 210 for Single & Hi/Lo Kits

Non Projector S3 4300k - Thanks Ravi

Non Projector S3 6000k + LED Parkers - Thanks Liam

As fitted with 4300k HID Kit and LED parkers (non group buy) in my former '89 Wagon.

Fitted with 4300k HID Kit and LED parkers in my Wheezy.

Projector S3 6000k + LED Parkers (non group buy) - Thanks Jase

Series 2 6000k with stock highbeams/spotties - Jeebus

HID - now available in the following colors.

They are not rated in grades of Kelvin like the standard, for arguements sake. But are of 4300k of that Color.

However Purple is considered 30000k.

Red is Considered as 2700k.

Yellow Gold is used 3000k (S13 Driving Foglamp)

@ $200 for Single Bulbs. Slimline Kits with colored bulbs are $235.

================================================================

Group Buy #9

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

=================================================================

Bank Details

Commonwealth Bank of Australia

Acc Name. Matthew P Tuckett

BSB . 063541

Acc No. 1072 8965

=================================================================

Prices.

I will try to put in a cut off date/time for this group buy so that people will not be waiting for numbers to be filled, once the numbers are sufficient.

But i invite anyone to ask there mates if they are interested in buying also.

PLEASE SPECIFY WHICH BULB TYPE AND TEMPERATURE RATING YOU NEED IN YOUR POST or PM.

PM Me if you have any requests for any other specific cars that you require HIDs for .. i have listings of most Manufacturer Types.

I am chasing up further for complete Holden and Ford listings for local cars at the moment.

HID "White" LED Parkers

1 x Pair of 12 LED BA15S parkers

Including Postage ANYWHERE in Australia

$ 25. Before i sell these individually, Group buy persons get first preference.

1 x Pair of 6 LED T10 Wedge Type parkers to suit Series 2 Headlights

Including Postage ANYWHERE in Australia

$ 15. Before i sell these individually, Group buy persons get first preference.

=================================================================

Payment and Shipping Process.

I will require all moneys paid at the end of the group buy, when full quota of 10 is reached.

.........Sooner you can get your money to me the better............

Once all is cleared, kits will be hopefully (pending customs or other) no more than 2weeks to your doorstep.

Usual Transit time from manufacturer to me has been less than a week from payment.

Postage from me to the buyers has been within 4days of postage and immediately after i recieve them from EMS.

Im NOT here to rip anyone off. just trying to provide a product to the best of my available ability.

Note : Any Warranty Claims that need to be sent back via airmail to the supplier, postage to and from the factory to be paid by the buyer.

I will do my best to provide alternatives to this process rather than waiting on lengthy delays for them to inspect and replace.

Warranty on the Ballast Packs and Bulbs are 12months.

=================================================================

Regards

Matt Tuckett

AngryIndustries.

If theres any questions or testimonies, i encourage you post a reply.

i will do my best to answer them.

Testimony #1

By FATGTS-R

Just adding a review for the 6000k and parkers for projectors.

Packaging:

Comes in a colour printed box, in english, which is sturdy enough to cope with general freight. Inside it is well secured and packed in tight in polystyrene.

The product it self looks well made with decent connections and a trick looking sheath over the loom.

Installation:

I usually run and hide if I see anything with wires but this was a piece of cake and plug and play is a true statement with zero modification to anything required. I simply unplugged all the connections on the globe and fed the wires through the rubber boot backwards to avoid having to stretch the boot over it or cut it out to 25mm like the instructions suggest. No cutting is required.

Then simply secure the light in place as normal and then reconnect the wires. Then clarify pos and neg on the headlight loom plug and plug it in.

Bolt the ballast down and turn the suckers on. Too easy and anyone who can count to ten can put these in.

Only headache, which is not related to the product is the pesky parkers which are a bitch to remove and replace as theres no room even for my long and skinny hands.

Performance:

I was honestly gobsmacked at how good they were. I did one side and turned them on for a comparison to halogen and it makes you think how you ever saw anything at all with the crappy things. I had them blaring at the side of my works shed and if you covered up the halogen globe it literally made no difference at all to the light projected as the single HID was overpowering it so extremely.

My boss who is a real pessimist initially mocked me for buying some "cheap chinese crap" but when he saw how they performed he was stunned silent and very impressed. Impressed to the degree he got me to contact Matt to see if any kits are available in 24 Volt as he wants to put some in the interstate running trucks.

In a nutshell, the price isnt highway robbery and very affordable to members of this site, installation is a true diy job even for the novice and performance over standard is 100 times better.

Reliability, well only time can answer that question but I have not heard of anyone having issues as yet. Matt will be able to answer if hes had any items returned to him for not working out the box or failing not long after install.