Jump to content
SAU Community

Recommended Posts

my rb20 when cold does not increase the throttle until warmed up. my main problem though which i think are tied together is that when i turn on my a/c it doesnt throttle up but boils down to a shut off.

i have cleaned the IAV and still no change

physical tests that i have carried out

  1. when i plug off the brown plug on the IAV the car immediately shuts off (if the rev is held it wont shut off but when replaced with the same rev it goes up drastically)
  2. when i pull the TPS screws and adjust in any direction i get no response
  3. when i remove the plug off the TPS no response
  4. when i remove the IAV and apply 12v to the pins the valve operates

what seems to be my problem?

Link to comment
https://www.sau.com.au/forums/topic/237690-rb20det-throttling-prob/
Share on other sites

  1. when i pull the TPS screws and adjust in any direction i get no response
  2. when i remove the plug off the TPS no response

I'd say that would be the main source of your problems. Get a multimeter out, the TPS has a 3 pin plug. 1 pin is 12V supply, one is a ground, and one is a 0-5V signal to the ECU. Find the 12V and ground pins, then measure between the ground and the 5V pin. You should get something like 0.5V with throttle closed and 4.5V with wide open throttle.

Or if you have a mate with a working RB20 in his car you could get him around and swap TPS to see if that fixes your problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @DraftySquash @Duncan he's not talking about the part that sits against the radiator support, he’s talking about the lip that sits towards the front outside of the car. anyway I had a look at other cooling panels and came across this one https://justjap.com/products/carbing-radiator-cooling-panel-plate-nissan-skyline-r34-gt-t?variant=37829684134087&currency=AUD&utm_source=google&utm_medium=organic&utm_campaign=Advanced feed&utm_content=Carbing Radiator Cooling Panel Plate fits Nissan Skyline R34 GT-T (Coupe)&srsltid=AfmBOoonzPDKqe9NgKi5U0AkFc2XvbXETGmNWvfNcyBT5DUZagMYHg9DZ70 if you take notice it’s the same shape.  well thankfully the justjap listing has a description and it says : - Nissan Skyline R34 GT-T Coupe (M/T -07/2000) this means it’s specifically for a s2. S2’s have different front bars to s1 so that lip with the 3 holes are *probably* mounting points for the s2 bar. im not 100% sure but im almost certain it will still fit a s1 bar       
    • Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
×
×
  • Create New...