Jump to content
SAU Community

Recommended Posts

After having some oil sitting from the lower cooler piping, and having cleaned that up, it starts coming from the top return piping, I'm pretty sure my stock turbo is on it's way out.

Just wondering where, and roughlyyy how much rebuilding the stock turbo will cost. And how long does it take someone to do it, just so I have an idea to workout transport etc.

I'm not after an aftermarket turbo or more power, since I'm saving for my new toy and this car is most likely being sold to my friends mum next year (seriously), I just want to know what's the better way to go about it stock turbo-wise. Upon saying that, I MAY look into the aftermarket turbo scenario if the rebuilding is going to cost over $1,000.

I'll probably only get it done mid-november when I'm back but I want to get the budget sorted. Any help? Cheers. ;)

Edited by Magic
Link to comment
https://www.sau.com.au/forums/topic/237774-rebuild-turbos/
Share on other sites

you are definitely looking over the 1.2k mark for a rebuild. You can ask performanz, i think they redid my turbos last time. The labour is usually about half of it and the other half going towards rebuilding. 2nd hand at this point if your plans are to sell is my opinion. As rev210 said you can probably get a 2nd hand one and put it on yourself which will save you alot.

Link to comment
https://www.sau.com.au/forums/topic/237774-rebuild-turbos/#findComment-4159412
Share on other sites

i looked into this jut recently as my turbo popped and went to heaven

its not worth rebuilding, it will cost over 1k and you can buy the same thing second hand for wayyyy cheaper

i have decided to go the upgrade as i want more power :D

but dont get it rebuilt or upgrade if you plan on selling soon as the turbo kit im getting is over $2500

turbos are not cheap ;)

Link to comment
https://www.sau.com.au/forums/topic/237774-rebuild-turbos/#findComment-4159427
Share on other sites

Oh ok. thanks for the info guys. hehe yeah Karl, I just spent over $3,000 on the WedsSport wheels and new rubbers that are being shipped atm, although it's only going to be on it with me for about 5 months-ish.. well that's the plan. Then I might buy another set with bigger offset for the new beast. ;)

So yeh looks like 2nd hand stock turb is the go.. next question... how will I know if I'm being sold an r33 rb25 or r34 rb25 turbo? is the size any different/markings etc? Obviously I don't want to downgrade..

Link to comment
https://www.sau.com.au/forums/topic/237774-rebuild-turbos/#findComment-4159574
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. So I have my GTR on the lift and have been working on it a few days and yesterday I unpacked the frontpipe that was wrapped with heat wrap stuff, because part of it was breaking down and soaked in oil. Noticed that the pipe itself does not actually look like a Mines, despite it supposedly being a Mines. But I could not find any fronpipe online that looks exacly like his, and I don't think it is a custom one. My amateur measurement also showed the two pipes are about equal length, so maybe this is just an old version of the Mines pipe? Would appreciate insight on this by the enlightened folks. greetings from Germany
    • Yeah. If I plug the connector in and connect the vacuum lines, I assume worse case scenario is that it simply doesn't work? Yep PFC.
    • I would think that rather than attempting to perform an engine swap, with all the difficulties associated with doing so in a country where the raw materials required are harder to get hold of, I would just build the CA20 for boost, find an EFI manifold for it and either add a turbo or a supercharger. Or both. You replace one set of difficulties with a different set, but I know which would be more fun.
    • Well, a proper aftermarket ECU** SHOULD be set up to run the purge solenoid, same as the factory ECU would, so that the tank breather system continues to operate the way it is supposed to. I have no knowledge of whether the PFC (which is what I assume you mean when you say Apexi) has an output (and internal logic) to run the purge solenoid. If it does not, then given the product design intent for the PFC, which is to be a plug in replacement for the stock ECU, I would consider that a massive failing on Apexi's behalf and would be another reason to think that they were a half-arsed solution to the problem if programmable management on RBs. I would suggest that since Nistune came to market (which is a LOOOOONG time ago now) there has been no valid argument for choosing a PFC, especially if the PFC can't do things like this.   **ie, Haltach, Link, Motec, etc
    • Thanks for asking the question we were all thinking!
×
×
  • Create New...