Jump to content
SAU Community

Recommended Posts

If you arent after more than 250rwkw, I would recommend you look at possibly fitting a GTR or Z32 fuel pump instead of the bosch 044 - alot less stuffing around.

Mine made 203 with power fc, fmic, exhaust and .85bar, so you could well be getting over that with 1 bar.

Hi Roy13 , the standard GTST pump is 135 litres per hour and supports 300 bhp at standard pressure. So 200 rwkw is already over what I would recommend using a standard GTST pump for. Our usual upgrade is a GTR pump which is 190 litres per hour and supports 420 bhp (260 rwkw) at standard pressure.

Next after that for us, is the Bosch 044 pump which is 330 litres per hour and supports 730 bhp (500 rwkw) at 73.5 PSI.

Hope that is some help.

Interesting.... im currently on 203rwkw with the standard fuel pump in my R33 GTS-T and im sure using the stock fuel pump is why im leaning out on 12psi coz i know it can go harder with the standard ecu/turbo.

Whats it cost these days to buy+install a GTR pump ?

I want something that can take around 275rwkw so that I won't need to replace it in 12mths time.

Interesting.... im currently on 203rwkw with the standard fuel pump in my R33 GTS-T and im sure using the stock fuel pump is why im leaning out on 12psi coz i know it can go harder with the standard ecu/turbo.

I had the same problem.. few dips and things on the dyno (flatspots I could feel too) and it was doing that at only 12psi, and with my cooler should be good for 14psi easily. So really i have a feeling the stock pump was starting to get a bit old and not providing enough fuel, quite short of 200rwkw. Really though you need to rig in a pressure guage in the fuel line to determine whether your fuel pressure is dropping. Have yet to get it back on the dyno to see whether its made any difference in reality or not.

Otherwise its maybe dirty injectors..

www.greenline.jp sell a Nismo Fuel Pump that pumps 175% more than the standard RB25DET fuel pump (246 Litres/hour).

Delivered to Australia they are ~$380. The website has a model of 17042-RRS40, does anyone know if these fit in-tank or....? Also whats it cost these days to have someone install them, would I get away with it all for $500 ?

Other side to the battery, there is a metal plate sort of khaki colour. Underneath is a big plastic screw on lid, has 3 fuel lines (one supply, with yellow band - one return and one for emissions?). If you unscrew it, you will find the fuel pump beneath:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...