Jump to content
SAU Community

Recommended Posts

ok i went out saturday nite .. and came home to this .

my parents didnt call me because they know how up set ill be etc .

IMGP1313.jpg

IMGP1314.jpg

IMGP1315.jpg

my car was locked and parked in front of my house with a silent alarm and imobaliser.

there is no damage to the door locks ..and no cut wires they even had some sorta key etc to try start the dam thing .

the culprits were disturbed when my parents herd my cars trying to start .

found 8 or more abbos in two cars one r33 and one wrx .

if ayone know of aything pm me etc

as i now have no car or job to get to .

THANKX to the scum

Link to comment
https://www.sau.com.au/forums/topic/238052-a-holes-in-adel/
Share on other sites

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

that's really bad mate.

Hate to be stereotypical, but aboriginals who drive WRX's and R33's usually wouldn't be the type to attempt to steal another car.

do you have a suburb this was done in?

feel for ya man :S

Unless they stole the 33 and the wrx also which isn't too hard to imagine.

Link to comment
https://www.sau.com.au/forums/topic/238052-a-holes-in-adel/#findComment-4162383
Share on other sites

Yeah i would agree

having known a lot of low life in my time its what they do

steal car A then drive around till they see car B keep trying till they get more or get into a high speed 99% of thefts aren't targeted just random drive by's

Link to comment
https://www.sau.com.au/forums/topic/238052-a-holes-in-adel/#findComment-4162425
Share on other sites

really sorry to hear of this mate

i can understand how upset people get when their pride and joy has been messed up

I dare say that they WRX and the R33 were both stolen as well

this is getting really bad

just as bad as it was at the beginning of the year

Link to comment
https://www.sau.com.au/forums/topic/238052-a-holes-in-adel/#findComment-4162522
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...