Jump to content
SAU Community

Recommended Posts

SA number plates to change from Wednesday

http://www.news.com.au/adelaidenow/story/0...10-2682,00.html

Article from: The Advertiser

September 29, 2008 01:00pm

MOTORISTS will start to notice something different on the state's roads from Wednesday.

SA's standard issue number plates are to get a new look as part of an Australia-wide move to eliminate duplication.

From Wednesday, number plates will comprise seven characters beginning with a fixed "S" followed by three numbers and three letters, for example, S123 ABC.

Motorcycle number plates will also adopt the fixed "S" to be followed by two numbers and three letters, for example, S12 ABC.

Registrar of Motor Vehicles Martin Small said the new plates will replace the current alpha numeric varieties that have now reached the end of their sequence.

"We've reached the end of the line with the current model and the change is timely given the potential for duplication to exist between state plates," he said.

"While the new plates serve the national interest, the unique 'S' clearly and concisely identifies the vehicle as being registered in South Australia."

The new plates will not carry a slogan but rather feature the words "South Australia" only in a move designed to most efficiently identify vehicles.

The range of slogan plates presently available for sale will be discontinued, but replacement plates will be available in the various existing formats until current stockpiles are exhausted.

Also, a new range of 'Euro' style number plates designed specifically for European cars will soon be released.

A slimline style, Euro plate will allow connoisseurs of European vehicles to add a distinctly SA flavour to their vehicle while maintaining the original look and feel.

Motorists seeking further information on the new number plates should visit www.ezyplates.sa.gov.au or call Service SA on 131084.

Here's the new general issue plates

general_issue.gif

Here's the new euro

euro_plate.gif

I reckon they look like turd personally. What do you think?

Link to comment
https://www.sau.com.au/forums/topic/238198-new-numberplates-for-sa/
Share on other sites

No ones discussed the price of these new plates have they? :D

Bet you they'll cost a damn sight more than the old ones ... substantially more ... money grabbing government :D

I dread to think how large the plates for bikes will be! :D

Maybe a ploy by the Government to slow motorcycles down by sticking a huge air (drag) brake on the back of it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ...just a note of warning, you shouldn't drive it about with the TCU in limp mode with only 3rd gear available ~ apart from the fact you end up sheering the ATF at the torque converter interface, the high clutch in these isn't especially the strongest, particularly bolted to the RB25DE mill...which is likely a 4AX01 box with lighter duty high clutch (the RB25DET got the bigger high clutch)...be careful out there...
    • Hoping to do similar mods to my RB20 once I get it running and reliable again
    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
×
×
  • Create New...