Ignition

[08yannch]

does any body know how to re wire the ignition loom on a RB25DET

i know a little but i need to source the clips that connect to the coils and connect the loom

i don't really want to buy one because new ones are like $300

[Bennett]

Make one like i did. Buy the clips from jaycar (they are the perfect size) and make a positive wire going to each coil and a negative wire going to each coil. Then do the fire signal to each coil. Make sure u know which color is for each cylinder coming from the ecu. I can show u a pic later if you want. Good luck with it! Beats paying for a new one.

[08yannch]

Make one like i did. Buy the clips from jaycar (they are the perfect size) and make a positive wire going to each coil and a negative wire going to each coil. Then do the fire signal to each coil. Make sure u know which color is for each cylinder coming from the ecu. I can show u a pic later if you want. Good luck with it! Beats paying for a new one.

wiring it all up should be pretty easy i will just use the original loom as a guide

but could you tell me what to search on the jaycar web site or will they have the parts in stock

[Bennett]

They will have the parts mate. They are called female spades. They look like this ( http://www.jaycar.com.au/ShowLargephoto.as...9161&IMAGE= ) but they are smaller and gold in colour. I got a packet of like 200 and they fit perfectly onto the stock coilpack and loom terminals. Just take in a coilpack to make sure you get the right size. Its a perfect fit.