Jump to content
SAU Community

Recommended Posts

any one else out there got the blaZz system . i do . quite handy/usefull/quirky/entertaining all at the same time . bloody easy way to check / reset ecu codes . also easy to reset self learn after every new mod . and other stuff like time trails and data logging . and checking injector duty cycle under full load . eg mine are at 88% right before i shift out of third at full load . and apparently the hearse does 0-100 in 6.3 seconds.

http://www.blazt.biz/

Link to comment
https://www.sau.com.au/forums/topic/238422-blazt-cables-and-software/
Share on other sites

seems a bit pricey IMO. Better off just sticking with the tried and true consult cable.

http://cgi.ebay.com.au/Nissan-Consult-Cabl...id=p3286.c0.m14

ECU Talk is an awesome application to use, its more than you will ever need (other than a wideband o2 sensor)

I have a different Diag cable and a few different programs.

It's a cool tool, really need 2 people to use it while driving, all the guages are really distracting :rofl:

Shows timing, voltages of various sensors, acceleration timing etc.

Seeing and resetting engine faults is great too.

So buy one if you can.

My Innovate LM2 has a wee screen and datalogging capability to a memory stick as well as an interface for a laptop. It comes with an OBDII plug and I have just located a "consult" to OBDII adaptor plug on ebay so hopefully it will give me the capabilities as above.

yeah shame that people in general dont know how much they should be paying for this stuff...that guy is just reselling this box:

http://cgi.ebay.com/ebaymotors/Nissan-Cons...emZ200254281450

i made a bunch of these a while ago, much better than having a huge box hanging out of the consult port and hitting your knees (if you can even drive with it in).

been thinking about making a batch of USB consult cables, seeing people paying way too much for something reasonable simple is fairly good incentive

and I have just located a "consult" to OBDII adaptor plug on ebay so hopefully it will give me the capabilities as above.

link? pretty sure nothing like that exists. there is a double ended plug (consult 1 side, obdii the other) that comes with consult II scantool, but it ISNT an adaptor that will allow u to use obdii on a consult car or vice versa.

yeah shame that people in general dont know how much they should be paying for this stuff...that guy is just reselling this box:

http://cgi.ebay.com/ebaymotors/Nissan-Cons...emZ200254281450

i made a bunch of these a while ago, much better than having a huge box hanging out of the consult port and hitting your knees (if you can even drive with it in).

been thinking about making a batch of USB consult cables, seeing people paying way too much for something reasonable simple is fairly good incentive

link? pretty sure nothing like that exists. there is a double ended plug (consult 1 side, obdii the other) that comes with consult II scantool, but it ISNT an adaptor that will allow u to use obdii on a consult car or vice versa.

do want!

If you do make some up I will have one straight away!

me and NewKleer go waaaaaay back !

haa. well not really but i have kept abreast of his work since he advertised on the pulsar forums

he was even so kind as to explain to me how to connect the old consult I made myself to the stagea consult plug - damn shame i Think I lost the info !

Someone from wA should get his!!!

yeah shame that people in general dont know how much they should be paying for this stuff...that guy is just reselling this box:

http://cgi.ebay.com/ebaymotors/Nissan-Cons...emZ200254281450

i made a bunch of these a while ago, much better than having a huge box hanging out of the consult port and hitting your knees (if you can even drive with it in).

been thinking about making a batch of USB consult cables, seeing people paying way too much for something reasonable simple is fairly good incentive

link? pretty sure nothing like that exists. there is a double ended plug (consult 1 side, obdii the other) that comes with consult II scantool, but it ISNT an adaptor that will allow u to use obdii on a consult car or vice versa.

If you are interested you can look on the innovatemotorsports.com website to find the manual for the LM2 meter. There is a section on OBDII which leads me to believe that all I need is a physical connection between the consult port and the OBDII plug that comes with the LM2 and the software will enable me to select up to 16 channels (I believe the consult has only 14) and manipulate the data. Of course no-one is going to buy a $700 LM2 for this purpose but it seems to me that when this little adaptor arrives (a double sided plug as you describe it) I will be able to access my ecu through the LM2 and/or a laptop connected to it as an additional feature of my LM2 (which I bought for tuning AFRs).

well keep us updated, but unless this plug has some electronics inside it to convert the physical signalling and data protocol, its not going to convert consult to obdII

on the usb consult cable topic, i've just got back 150 cables from having the consult connector assembled onto them (just the cable + consult connector assebled on end, the usb end/circuitry isnt done or anything, just plain wires). will do some maths and work out how much i could get some usb consult cables done for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model. Congrats on your GTS purchase! I'd personally leave it NA.
    • In this thing about this 100% renewal energy stuff I hear no one really talking about anything other than power and fuel really Power and fuel, whilst being a huge part of how we use the billion year old Dinosaur juices, are only 2, of the probably thousands of things that we need to use it for in the chemicals industries for making nearly everything we use nowadays I'm all for a clean planet, but if we want to continue to have all the day to day appliances and stuff that we rely on everyday we will still need fossil fuels Whilst I do love science, and how it can bring innovation, there's really a limit to how far it can go in relation to "going green" As for EV's, unless your charging of your own solar panels, it isn't helping the environment when you consider the the batteries, the mining processes required,  the manufacturing process required, and how long a batteries (read: the vehicle) lasts long term If I was supreme dictator of the world, I would ban the use of sugar for fizzy drinks and food additives and use that for ethanol manufacturing, petrol engines would be happier, and people would be alot healthier  Disclaimer: Whiskey manufacturing would still be required, so says the supreme dictator of the world Same same for all the vegetable oils that get pumped into all our food, use that for bio diesel Disclaimer: the supreme dictator would still require olive oil to dip his bread in This would take some of heat off the use of the use of fossil fuels which are required for everything we use, unless you want to go back to pre 1800 for heat and power, or the early 1900's for plastics and every thing else that has come from cracking ethylene  Would I be a fair and just dictator, nope, and I would probably be assassinated within my first few months, but would my cunning plan work, maybe, for a while, maybe not Meh, in the end in an over opinionated mildly educated arsehole typing out my vomit on my mobile phone, which wouldn't be possible without fossil fuels And if your into conspiracies, we only need the fossil fuels to last until a meteor hits, or thermonuclear annihilation, that would definitely fix our need for fossil fuels for manufacturing and power issues for quite some time  Meh, time for this boomer to cook his lunch on his electric stove and then maybe go for a drive in my petrol car, for fun    
    • It really helps that light duty vehicles have absolutely appalling average efficiency due to poor average load. Like 25% average brake thermal efficiency when peak is somewhere around 38% these days. So even a 60% BTE stationary natural gas plant + transmission and charging losses still doing much better with an EV than conventional ICE. And that's before we get into renewables or "low carbon nonrenewable" nuclear which makes it a no-brainer, basically. In commercial aircraft or heavy duty diesel pulling some ridiculous amount of weight across a continent the numbers are much more difficult to make work. I honestly think in 5-10 years we will still be seeing something like the Achates opposed piston diesels in most semi trucks running on a blend of renewable/biodiesel. Applications where the energy density of diesel is just too critical to compromise. CARB is running trials of those engines right now to evaluate in real world drayage ops, probably because they're noticing that the numbers just don't work for electrification unless our plan is to make glorified electric trains with high voltage wires running along every major highway and only a token amount of battery to make it 30 miles or something like that after detaching. Transport emissions is not insignificant especially in the US, but yes there's a lot of industrial processes that also need to be decarbonized. I agree the scale of the problem is pretty insane but EDF managed to generate ~360 TWh from their nuclear reactors last year and this is with decades of underinvestment after the initial big push in the 70s and 80s. I don't think the frame of reference should be solar-limited. France is not exactly a big country either. Maybe it doesn't work everywhere, but it doesn't have to either. We just can't live off of fracking forever and expect things to be ok.
    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
×
×
  • Create New...