Jump to content
SAU Community

Recommended Posts

ok alot of people gave me a few replys about what the weird whistle was in my car but i though ill upload it and then they can watch it and hear it for them selfs i played with the trotle a bit u can hear it go wen i start to accelerate and the whistle dies down this sounds alot louder than it should be because when the bonnet is closed you obviously cant hear it as much.

Alot of people told me to take it back and i did when i noticed it and he told me they took the engine out and they could not find anything wrong and its not something i should be concerend about but i hate it and i want it to run quiet and smooth like alot of other GT-Rs so watch and give me your feed back.

ps. cars out of warenty now for the rebuild and he f**ked me over the last time i was there so going back is not an option!!!

http://au.youtube.com/watch?v=hQQaU9Fq0j0

Edited by godz1r

Yeah from the vid it sounds like more of a squeak than a whistle, most probably what Karl said, poor water on your belts when its running see if it stops for a few seconds.

If it was a whistle noise I'd say it was your intake/induction pipes/exhaust/turbo. If it was a scrape noise like metal on metal inside the engine I'd be worried and taking it back to the rebuilder.

if your think its internal grab a big flat head screw driver, put the handle to your ear and the blade on various engine parts and see where it's coming from.

Good luck :P

mmmm funny you should say that about the belts because at the front i noticed one of the belts is worn on the the side and i looked down with a torch and it looks like it might be hitting a bolt for some reason ill try that water thing tonight and ill tell you what happens to it

Turbo seals etc were replaced not long back pretty sure its not them to me it sounds like its coming from the front but then i cant tell 100% because if you lean in it sounds like its coming from the plenum or like under it near the injectors.

thanks for your help ill keep you guys posted

I am not a guru,

But there sounded like a Knock in the background.....

I thought I could just hear it over the noise of the lifters.....

Possible other issues? Big End Bearing?

As well as Belts slipping

knock ? wtF? i just got it rebuilt car drives fine its peaking on the dyno and its not over boosted it runs fine does not miss a beat its just a noise and thanx for that gay little photo that really helps me mate thanks i dont need stupid immature comments like that im asking for peoples help if you don't want to help go make a thred about being a sad flamin mongrel!

I poured water on the belts its not that thanks guys for that advice but didn't work its coming from under the injectors im going with air leek the car runs 100% tho no problems at all

yea man mmmmmm i will take it just in the spraying process atm trying to get the Bit*ch on the Rd asap but i will take it to someone asap like the cars performance could not be any better i just have it in the back of my mind and a bit concerned about it ah wellz :( have not had much luck with the car and cant see that changing but ill take it to someone in next few weeks n see how i go thanks man



  • Similar Content

  • Latest Posts

    • Hi soviet_merlin, We appreciate your concern regarding this possibly being some sort of PR/Political hype, I assure you that is not the case, I wish we could claim something like that, but in this case, we merely reached out for comment on the basis of the outrage we too felt, as those heavily in the automotive industry. Ps. the original source in the social media post is CarExpert not CarExplore.    Best, CE.
    • Made a bit of a discovery, but while I was cruising, I randomly decided to test to see if it worked and it showed up on my IC7. The entire time I tested it before, I never thought to turn the ignition on. I only tested it with head lights turned on but with the ignition off. Huge oversight on my end. I’m a dummy. I know. 
    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
×
×
  • Create New...