Jump to content
SAU Community

Recommended Posts

Some of you may of read my other post with the drama's i have had with my Autech 260RS, well after getting on the piss me with me mates they suggested getting a stock series 1 and swapping it all over. Well i have done that and know im starting the planning process now of how am i going to do this?!!

I have a Series 2 Autech 260rs and i want to put it all into the stock series 1 RS4 i have.

I have been told that the mechanicals will go straight in, and ive read the posts on the manual conversion, this stuff isnt to hard for me to do as i have access to a hoist and all tools.

What worries me is the electric side of things, im hoping the engine looms will interchange?

I want to put the series 2 front end on, any problems lay ahead of me there? Will the lights etc be the same wiring?

I want to put the series 2 interior in, with the 3 gauges etc will the wiring be there? Or part of the Autech loom? I will swap the seats etc to.

Our theory is that they wouldnt of changed to much between the two? mainly just cosmetic?

Anyone have any suggestions?

Hurdles were gonna face?

Thanks

Neil

Don't forget that the 260RS is structurally stiffer in the body due to some extra reinforcements in the body and chassis. I know that there is extra bracing in the top of the c-pillars, but can't remember where the rest is.

i would think if you want to do it right you would need to virtualy strip to a shell and start from scratch

looms etc would prob be a straight forward swap over etc.i wouldnt count on wiring being in the s1 to suit s2.i know that a dayz s2 with satnav etc the looms are diff to my stock s2.

i don't see why, when you have everything out, you wouldn't just swap EVERYTHING over including looms etc to save any unforseen electrical hassles. tis what i would do. the headlight wiring loom would be slightly different too with the s2 having the divorced highbeams

one of the autech chassis strengtheners from memory is a brace under the tailshaft tunnel, its removal and goes straight on a series 1 stagea, i know this because mine has got one.

as mike said just put every loom from the autech in the s1 and then u know its the same :P alot of work ahead, taking the dash etc out is a pain in the arse but something that just takes time.

good luck mate and give me a buzz if have any issues along the way :/

I will taking bulk pictures for sure.

Gonna be a massive job but i have booked holidays from work and so have a few of my mates so we can get it done.

Sounds like an entire loom swap is gonna happen.

But what an opportunity! :D

The ability to "neaten" everything above and beyond factory spec means you have the chance to build a damn nice machine man.

Good luck with it. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cool to see you're on the forum man, think you've met my twin brother a few times (Brent).
    • Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model. Congrats on your GTS purchase! I'd personally leave it NA.
    • In this thing about this 100% renewal energy stuff I hear no one really talking about anything other than power and fuel really Power and fuel, whilst being a huge part of how we use the billion year old Dinosaur juices, are only 2, of the probably thousands of things that we need to use it for in the chemicals industries for making nearly everything we use nowadays I'm all for a clean planet, but if we want to continue to have all the day to day appliances and stuff that we rely on everyday we will still need fossil fuels Whilst I do love science, and how it can bring innovation, there's really a limit to how far it can go in relation to "going green" As for EV's, unless your charging of your own solar panels, it isn't helping the environment when you consider the the batteries, the mining processes required,  the manufacturing process required, and how long a batteries (read: the vehicle) lasts long term If I was supreme dictator of the world, I would ban the use of sugar for fizzy drinks and food additives and use that for ethanol manufacturing, petrol engines would be happier, and people would be alot healthier  Disclaimer: Whiskey manufacturing would still be required, so says the supreme dictator of the world Same same for all the vegetable oils that get pumped into all our food, use that for bio diesel Disclaimer: the supreme dictator would still require olive oil to dip his bread in This would take some of heat off the use of the use of fossil fuels which are required for everything we use, unless you want to go back to pre 1800 for heat and power, or the early 1900's for plastics and every thing else that has come from cracking ethylene  Would I be a fair and just dictator, nope, and I would probably be assassinated within my first few months, but would my cunning plan work, maybe, for a while, maybe not Meh, in the end in an over opinionated mildly educated arsehole typing out my vomit on my mobile phone, which wouldn't be possible without fossil fuels And if your into conspiracies, we only need the fossil fuels to last until a meteor hits, or thermonuclear annihilation, that would definitely fix our need for fossil fuels for manufacturing and power issues for quite some time  Meh, time for this boomer to cook his lunch on his electric stove and then maybe go for a drive in my petrol car, for fun    
    • It really helps that light duty vehicles have absolutely appalling average efficiency due to poor average load. Like 25% average brake thermal efficiency when peak is somewhere around 38% these days. So even a 60% BTE stationary natural gas plant + transmission and charging losses still doing much better with an EV than conventional ICE. And that's before we get into renewables or "low carbon nonrenewable" nuclear which makes it a no-brainer, basically. In commercial aircraft or heavy duty diesel pulling some ridiculous amount of weight across a continent the numbers are much more difficult to make work. I honestly think in 5-10 years we will still be seeing something like the Achates opposed piston diesels in most semi trucks running on a blend of renewable/biodiesel. Applications where the energy density of diesel is just too critical to compromise. CARB is running trials of those engines right now to evaluate in real world drayage ops, probably because they're noticing that the numbers just don't work for electrification unless our plan is to make glorified electric trains with high voltage wires running along every major highway and only a token amount of battery to make it 30 miles or something like that after detaching. Transport emissions is not insignificant especially in the US, but yes there's a lot of industrial processes that also need to be decarbonized. I agree the scale of the problem is pretty insane but EDF managed to generate ~360 TWh from their nuclear reactors last year and this is with decades of underinvestment after the initial big push in the 70s and 80s. I don't think the frame of reference should be solar-limited. France is not exactly a big country either. Maybe it doesn't work everywhere, but it doesn't have to either. We just can't live off of fracking forever and expect things to be ok.
×
×
  • Create New...