Jump to content
SAU Community

...more R34 Customizations

Dal34

By Dal34,
in Exterior & Interior Styling

 Share

Recommended Posts

Dal34 Collaborator

Dal34

Posted
  • Author
Posted

Quick one on how I did it;

Cut out a peice of thick plywood to size, prepped it, painted it matte black and then glued the shithouse out of it on the back, but the gauges can still pop out if need be. (the whole unit will be resprayed next week). Cut the holes to size, popped in the gauges and off I went.

The reason you need the ply is because the gauges are too small for the hole in the stock gauge pod..in fact the stock gauge pod is not circular, slightly oval shaped. But you cannot see any gap at all around the gauges, but I painted the ply black just in case.

To install the turbo timer, all i did was pop out the two existing switches which were located there. (fog lights and a blank), and cut out the middle between the two with a knife then sanded the edges smooth, the greddy full auto timer is a direct fit in there, i didnt need to brace it in the back or anything as its a really tight fit.

Dal34 Collaborator

Dal34

Posted
  • Author
Posted
man i wish i thought of that, i might have to move mine now :) , gauges look the goods too mate, i think that's next on my list, but i think i'll change the volt meter for an air/fuel mixture gauge. top job :P

Next gauge im getting is a volt gauge, but im cutting out the cigarette lighter and placing it flush there.

BJV Enthusiast

BJV

Posted
Posted

hey nice job on the turbotimer mate, I was looking at doing the same thing with my boost controller which is pretty much the same size to the turbo timer. Was there much room behind your timer when you put it in? And did you just stick the fog light switch on the blank switch panel on the left of the steering wheel?

Dal34 Collaborator

Dal34

Posted
  • Author
Posted
hey nice job on the turbotimer mate, I was looking at doing the same thing with my boost controller which is pretty much the same size to the turbo timer. Was there much room behind your timer when you put it in? And did you just stick the fog light switch on the blank switch panel on the left of the steering wheel?

Hey,

Sooo much room behind the timer, and i just ditched the fog light switch as i removed the fog lights all together too.

  • 2 weeks later...
dkslong Enthusiast

dkslong

Posted
Posted
Hi Guys,

Today I've been hard at work, this time, centre three gauges redone and the turbo timer installed.

The results speak for themselves, here are the pictures. Comments welcome.

wow that looks sooo clean and professinal

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Not stock. All remade. Mostly looks stock because the pipes run to and from the standard holes in the inner guard to get to the return flow FMIC. I'm not sure which question you're trying to ask, because it seems like "stock position" vs "stock position".
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Hey, it's a GT-R, it's just as significant a moment as mine😁 It's not ideal when things are uncertain; I'm the type of person that always has a set plan for things in life so being unsure of this plan puts me in a weird place mentally.
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card style AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had no flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
×
×
  • Create New...