Jump to content
SAU Community

Recommended Posts

anyone see the huge crash involving a honda civic

guy was on his green P's

coming down blair street. hit a tree and rolled

i happened to be on the verge of falling asleep in the car while mum was at the doctors

so all i heard was a massive BANG SHWOOOMM ERRRRRRR driver was okay

but f**k me was he lucky.. if he hit the tree just a little more sideways he would of been a goner fer sure

Link to comment
https://www.sau.com.au/forums/topic/238719-massive-crash-in-broady/
Share on other sites

yerp alot

when we pushed the car back on its wheels he had this lost look on his face, like WTF HAPPENED?

jeez watta wake up call man.. about half an hour after that a guy in a VS comes flying past us

lol.. it was almost a pile up because i could of sworn i saw something red swish past in the rearview mirror.

i step out and theres a ute on the side of the road. cars stopped everywhere and a rolled over civic..

it had a fart cannon and 15 inch rims

lol.. it was almost a pile up because i could of sworn i saw something red swish past in the rearview mirror.

i step out and theres a ute on the side of the road. cars stopped everywhere and a rolled over civic..

it had a fart cannon and 15 inch rims

must have stupidly hit vtec in the wet

massive crash > single vehicle accident

i guess its a "if you were there" type of thing

as much as i wanted to whip my phone out and snap some pics.

i thought that would be highly innapropriate to do it...

so i dialled 000

f**kin coolant and steering fluid everywhere..

(b1)

he was out cold when we had a look in the car..

i was a bit hesitant.. my cousin recently died in a car crash so i didnt know how ill take seeing a dead guy again.

his foot was still planted on the accelerator though so the thing was revving like f**k till we turned it off

front part of the driver side was crushed. door wouldnt open.

suspension, tire ripped out of place

the part where it curves for the window was on a 90 degree angle.

so from 45 degree to 90, thats pretty messed up

Cat? Do you mean car? Yeah saw the car, big bloody mess. But I think the reported speed of 150km/h may be a bit on the high side to be honest.

150 maybe high - cos its only an estimate, however, he was at a BAC level of 0.165 - so he doesnt know the speed, and says he saw a cat.

Being that drunk, you might as well see leprechauns dancing around the streets and in the inside of the car.....

150 maybe high - cos its only an estimate, however, he was at a BAC level of 0.165 - so he doesnt know the speed, and says he saw a cat.

Being that drunk, you might as well see leprechauns dancing around the streets and in the inside of the car.....

Ahh... ...Leprechauns...

I always seem to have the worst luck when I see them... :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
    • Noted. Have noticed BMW are more 'high maintenance' for sure. They've attracted my attention as I think the used car prices seem reasonable vs other options, and the extra quality overall vs a commodore / camry / corolla or similar of the same vintage is appealing, especially the interior, and they are more on the sporty side whereas the others mentioned can be more cruising or economical A-to-B only.
×
×
  • Create New...