Jump to content
SAU Community

Recommended Posts

hi everyone

some of you might be familier with this topic http://www.skylinesaustralia.com/forums/bu....html&st=20 posted quite a few years ago...and still very helpfull.....basicily it talks about what you should do when you are looking to buy a skyline

anyway one of the points says "The BLUE Nissan Build Plate should have the details PRINTED on it... i.e. If you run your fingers over the details printed on it, it should be smooth. IT SHOULD NOT BE ENGRAVED... If it's engraved, it has a fake Nissan Build Plate with a fake Chassis Number. These are forged and put on stolen cars with a new and legitimate chassis number. "

i checked mine...i have the plastic rivit things...and i ran my fingure over it and its engraved!!!...i pretty sure my car isnt a rebuilld....its been through the works on the legal side...also i got it from edward lees imports dealership...i jsut want other r34 owners to go and check ther blue plates...run ur fingure over it...and please tell me that its slightly engraved!!!

another guy posted a reply on the second page of that topic i linked above and said that he went to a dealership and check 3 other r32's and they all had engraved plates....and asked wether the smooth thing applied only to the r33's....and no one answerd him :S

so now im freaking out:P and i wants some closure!! Help me R34 owners.....unfortunaly i dont have a handfull of r34's lieing around so i cant go and check hehe

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

ok this is starting to freak me out....a guy just pm's me saying that he got his r34 from lee's and his plate is engraved.....

ill give some more info my car is a 1998 r34 25gt non turbo (im a p plater:P)

the guy above me has a GTT not sure wat year... soooo im hope that the non turbo 1998 come with engravings....or else this could be really bad for me...

ok this is starting to freak me out....a guy just pm's me saying that he got his r34 from lee's and his plate is engraved.....

ill give some more info my car is a 1998 r34 25gt non turbo (im a p plater:P)

the guy above me has a GTT not sure wat year... soooo im hope that the non turbo 1998 come with engravings....or else this could be really bad for me...

Mines a 98 model and yes i don't believe it had 45000km on it when i 1st bought it. Steering wheel and gear knob was very warn.

I've come to live with the fact that any skylines imported from japan does not have genuine KM's, like maybe some do if you can monitor the whole thing from start to finish.

I still need to check my timing belt which is supposedly done at 100 000KM's, i just gotta wait until i reach 100 000kms

Mines a 98 model and yes i don't believe it had 45000km on it when i 1st bought it. Steering wheel and gear knob was very warn.

I've come to live with the fact that any skylines imported from japan does not have genuine KM's, like maybe some do if you can monitor the whole thing from start to finish.

I still need to check my timing belt which is supposedly done at 100 000KM's, i just gotta wait until i reach 100 000kms

yea but see....wer talking about diffrent things.....ur talking about odo tampering....but ur car...according to the link i posted in 1st reply....has a genuine blue build plate...where as mine and the guy that pm'd me seem to have fake ones.....my car is perfect btw....it had 68,000 when i baught it...and no wear and tear on the inside of the car....absolutly perfect...same with engine and paint and everything grade a import..or wtvr the grading systen is for jap imorts....but im still freaked out because if i want to sell this thing...and it is a rebuild/rebirth...wtf am i going to do!!

yea but see....wer talking about diffrent things.....ur talking about odo tampering....but ur car...according to the link i posted in 1st reply....has a genuine blue build plate...where as mine and the guy that pm'd me seem to have fake ones.....my car is perfect btw....it had 68,000 when i baught it...and no wear and tear on the inside of the car....absolutly perfect...same with engine and paint and everything grade a import..or wtvr the grading systen is for jap imorts....but im still freaked out because if i want to sell this thing...and it is a rebuild/rebirth...wtf am i going to do!!

I mentioned it cos they normally interrelate and that its something to look out for.

In your case well need more replies from non turbo's.

Hang in there mate just gotta wait for the replies

I mentioned it cos they normally interrelate and that its something to look out for.

In your case well need more replies from non turbo's.

Hang in there mate just gotta wait for the replies

yea i know...i need to chillax a bit...breath and all that jazz...i just love my car so much <3...atleast i can be thankfull that it works great....and it looks like its 2 years old....

Yea it did man..and we both checked in...me and the guy above ur post....it all matched up thankfully

Just to confirm: yes it all lines up. :thumbsup:

But I like a few others here I also have my suspicions about the build plate not being laminated.

i pm'd the guy that 1st asked about the blue plate being engraved and if it only applied to the r33(hes located on the second page of the thread link i posted in my 1st post)....and he said it that the engraved blue plates that are supposed to be fake only applies to the r33's......soo what is now confusing me even more....didnt know it cud get any more confused.....is that i have r33's telling me that ther plates are engraved.....which is supposably the fake ones...and then i have r34's telling me they have smooth ones…..when the engraved things shudnt apply!! and also i have 2 ppl including myself who have r34's with engraved.......

whats going on!!!

i hope someone can read this and shed some light...or just more ppl checking ther blue plates so we can start getting some consistencies

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...