Full Guide On Installing The Vg30 Turbo To A Rb20

[JiN_MaN]

we used a rb25 turbo on an rb20 and it was making 271rwhp on 17psi

so there is nothing wrong with using a 25 turbo iether just personal preferance and budget..

Rb20

VG30

FMIC

Fuel Pump

Exhaust

198rwkw @ 15psi

Did 1 run on 17psi and was going past 208rwkw when it ran out of fuel and was backed off, probably didnt have much more than 210rwkw.

[niran]

Rb20

VG30

FMIC

Fuel Pump

Exhaust

198rwkw @ 15psi

Did 1 run on 17psi and was going past 208rwkw when it ran out of fuel and was backed off, probably didnt have much more than 210rwkw.

hey bro, thanks for the power figures .. will upload mine once i do my tune soon

[fourdoorlove]

niran, where are you looking to get your tune done in the perth area?

i am also looking into the VG30 turbo setup..

[fourdoorlove]

niran, where are you looking to get your tune done in the perth area?

i am also looking into the VG30 turbo setup..

[fourdoorlove]

niran, where are you looking to get your tune done in the perth area?

i am also looking into the VG30 turbo setup..

(sorry about posting 3 times, comp messed up )

Edited April 13, 2009 by fourdoorlove

[niran]

niran, where are you looking to get your tune done in the perth area?

i am also looking into the VG30 turbo setup..

(sorry about posting 3 times, comp messed up )

Hey bro

Yep i am going to be getting it tuned in perth.. i just got a yellow sticker so just been busy trying to get that off.. but after that the plan is to buy some r32 gtr injectors, and then give it to all star garage and get them to install a nistune chip and then get them to tune it.

Thanks niran

[migs]

guys i need some info asap how do you tell the difference in the

Ballbearing vg30 t3 turbo

and the

Jurnal bearing vg30 t3 turbo

need info a.s.a.p?????????????????????????????????????????????

[migs]

ok this it the turbo

is this ball bearing or not ?

[niran]

guys i need some info asap how do you tell the difference in the

Ballbearing vg30 t3 turbo

and the

Jurnal bearing vg30 t3 turbo

need info a.s.a.p?????????????????????????????????????????????

Hey man

I think it goes by the versions.. There was another thread where i asked the same question as you did and its somewhere on skyaus most likely on forced induction.. Besides that if you already have the turbo you could go to a jap shop and ask them too

niran

[DC Drift]

VQ30det turbo is ball bearing is also bolt on for rb20,

will be fitting to an rb20 in the next few weeks will upload power figures ect once completed

[stÖrmy]

i recently got a vg30 turbo to bolt onto my rb20, i have a few questions though, how do i find out if its ceramic or steele? it sais 45v2 on it.

Also, im putting the rb20 actuator on the vg30 turbs, will it hold 15psi or will i need an external wastegate?

[r32silvergts]

how are u guys runing 17 psi through the vg 30 turbo if it has a ceramic exhaust wheel. is there a ball bering version with a steel exhaust wheel? and what are u doing ecu wise to run 17 psi remap? or just a tune?

niran i got

FMIC

exhaust

040 FP

Ebc

i want 198rwkw

what do i have to do apart from bolt the turbo on? coz that bit is no prob