Jump to content
SAU Community

Recommended Posts

we used a rb25 turbo on an rb20 and it was making 271rwhp on 17psi

so there is nothing wrong with using a 25 turbo iether just personal preferance and budget..

Rb20

VG30

FMIC

Fuel Pump

Exhaust

198rwkw @ 15psi

Did 1 run on 17psi and was going past 208rwkw when it ran out of fuel and was backed off, probably didnt have much more than 210rwkw.

Rb20

VG30

FMIC

Fuel Pump

Exhaust

198rwkw @ 15psi

Did 1 run on 17psi and was going past 208rwkw when it ran out of fuel and was backed off, probably didnt have much more than 210rwkw.

hey bro, thanks for the power figures :O.. will upload mine once i do my tune soon

  • 2 weeks later...

niran, where are you looking to get your tune done in the perth area?

i am also looking into the VG30 turbo setup..

(sorry about posting 3 times, comp messed up :P)

Edited by fourdoorlove
niran, where are you looking to get your tune done in the perth area?

i am also looking into the VG30 turbo setup..

(sorry about posting 3 times, comp messed up :) )

Hey bro

Yep i am going to be getting it tuned in perth.. i just got a yellow sticker so just been busy trying to get that off.. but after that the plan is to buy some r32 gtr injectors, and then give it to all star garage and get them to install a nistune chip and then get them to tune it.

Thanks niran

guys i need some info asap how do you tell the difference in the

Ballbearing vg30 t3 turbo

and the

Jurnal bearing vg30 t3 turbo

need info a.s.a.p?????????????????????????????????????????????

Hey man

I think it goes by the versions.. There was another thread where i asked the same question as you did and its somewhere on skyaus most likely on forced induction.. Besides that if you already have the turbo you could go to a jap shop and ask them too

niran

  • 4 weeks later...
  • 1 year later...

i recently got a vg30 turbo to bolt onto my rb20, i have a few questions though, how do i find out if its ceramic or steele? it sais 45v2 on it.

Also, im putting the rb20 actuator on the vg30 turbs, will it hold 15psi or will i need an external wastegate?

  • 4 weeks later...

how are u guys runing 17 psi through the vg 30 turbo if it has a ceramic exhaust wheel. is there a ball bering version with a steel exhaust wheel? and what are u doing ecu wise to run 17 psi remap? or just a tune?

niran i got

FMIC

exhaust

040 FP

Ebc

i want 198rwkw

what do i have to do apart from bolt the turbo on? coz that bit is no prob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...